Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1321-7BH01-2AB0 PLC add-on module

Data sheet 6AG1321-7BH01-2AB0

SIPLUS S7-300 SM 321-20-pole -25...+70°C with conformal coating

Conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES7321-

7BH01-0AB0. Digital "input Isolated ""16 DI; 24 V DC," "1x 20-pole,""

process interrupt," diagnostics, suitable for isochronous mode

operation

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

from load voltage L+ (without load), max. 90mA

from backplane bus 5 V DC, max. 130mA

Power loss

Power loss, typ. 4W

Digital inputs

Number of digital inputs 16

Input characteristic curve in accordance with IEC

61131, type 2

Yes

Number of simultaneously controllable inputs

horizontal installation

6AG1321-7BH01-2AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1321-7BH01-2AB0 SIPLUS S7-300 SM 321-20-pole -25...+70°C with conformal coating Conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES73217BH01-0AB0. Digital "input Isolated ""16 DI; 24 V DC," "1x 20-pole,"" process interrupt," diagnostics, suitable for isochronous mode operation Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● permissible range, lower limit (DC) 20.4 V ● permissible range, upper limit (DC) 28.8 V Input current from load voltage L+ (without load), max.
PAGE 2
— up to 60 °C, max. 16 vertical installation — up to 40 °C, max. 16 Input voltage ● Type of input voltage DC ● Rated value (DC) 24 V ● for signal "0" -30 to +5V ● for signal "1" 13 to 30V Input current ● for signal "1", typ. 7 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable Yes; 0.1 / 0.5 / 3 / 15 / 20 ms Cable length ● shielded, max. 1 000 m ● unshielded, max.
PAGE 3
between different circuits 75 V DC/60 V AC Isolation Isolation tested with 500 V DC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Use in hazardous areas ● ATEX Yes Railway application ● EN 50155 Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B, EN 50155:2007 Ambient conditions Ambient temperature during operation ● min. -25 °C ● max.
PAGE 4
— to mechanically active substances according to EN 60721-3-5 Yes; Class 5S3 incl. sand, dust; * Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl.