Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1322-1BH01-2AA0 PLC output card

Data sheet 6AG1322-1BH01-2AA0

SIPLUS S7-300 SM322 - 20-POLE -25...+70°C with conformal

coating with conformity EN50155 T1 CAT 1 KL A/B based on

6ES7322-1BH01-0AA0 . DIGITAL OUTPUT OPTIC. ISOLATED

16D0, 24V DC, 0.5A, SUM OF CURRENTS 4A/GROUP

(8A/MODULE)

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

from load voltage L+ (without load), max. 80mA

from backplane bus 5 V DC, max. 80mA

Power loss

Power loss, typ. 4.9W

Digital outputs

Number of digital outputs 16

Limitation of inductive shutdown voltage to L+ (-53 V)

Switching capacity of the outputs

● on lamp load, max.

5W

Load resistance range

6AG1322-1BH01-2AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1322-1BH01-2AA0 SIPLUS S7-300 SM322 - 20-POLE -25...+70°C with conformal coating with conformity EN50155 T1 CAT 1 KL A/B based on 6ES7322-1BH01-0AA0 . DIGITAL OUTPUT OPTIC. ISOLATED 16D0, 24V DC, 0.5A, SUM OF CURRENTS 4A/GROUP (8A/MODULE) Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● permissible range, lower limit (DC) 20.4 V ● permissible range, upper limit (DC) 28.8 V Input current from load voltage L+ (without load), max. 80 mA from backplane bus 5 V DC, max.
PAGE 2
● lower limit 48 Ω ● upper limit 4 kΩ Output voltage ● for signal "1", min. L+ (-0.8 V) Output current ● for signal "1" rated value 0.5 A ● for signal "1" minimum load current 5 mA ● for signal "0" residual current, max. 0.5 mA Switching frequency ● with resistive load, max. 100 Hz ● with inductive load, max. 0.5 Hz ● on lamp load, max. 10 Hz Total current of the outputs (per group) horizontal installation — up to 40 °C, max. 4A — up to 60 °C, max. 3A — up to 70 °C, max.
PAGE 3
Permissible potential difference between different circuits 75 V DC/60 V AC Isolation Isolation tested with 500 V DC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Railway application ● EN 50155 Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B, EN 50155:2007 Ambient conditions Ambient temperature during operation ● min. -25 °C ● max.
PAGE 4
— to chemically active substances according to EN 60721-3-5 Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 50155 (ST2); * — to mechanically active substances according to EN 60721-3-5 Yes; Class 5S3 incl. sand, dust; * Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc.