Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1326-1BK02-2AB0 PLC add-on module

Data sheet 6AG1326-1BK02-2AB0

SIPLUS S7-300 SM 326F DI24 40-pole -25...+60°C (70°C with forced

convection) with conformal coating based on 6ES7326-1BK02-0AB0

. Digital input F-DI 24x24 V DC Fail-safe digital input for SIMATIC S7

F-systems with diagnostic alarm

Supply voltage

Rated value (DC) 24V

Input current

from load voltage L+ (without load), max. 450mA

from backplane bus 5 V DC, max. 100mA

Encoder supply

Number of outputs 4; Isolated

Output current

● Rated value

400mA

Power loss

Power loss, typ. 10W

Digital inputs

Number of digital inputs 24

Number of simultaneously controllable inputs

all mounting positions

— up to 40 °C, max.

6AG1326-1BK02-2AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1326-1BK02-2AB0 SIPLUS S7-300 SM 326F DI24 40-pole -25...+60°C (70°C with forced convection) with conformal coating based on 6ES7326-1BK02-0AB0 . Digital input F-DI 24x24 V DC Fail-safe digital input for SIMATIC S7 F-systems with diagnostic alarm Supply voltage Rated value (DC) 24 V Input current from load voltage L+ (without load), max. 450 mA from backplane bus 5 V DC, max.
PAGE 2
— up to 60 °C, max. 24; (at 24 V) or 18 (at 28.8 V) Input voltage ● Type of input voltage DC ● Rated value (DC) 24 V ● for signal "0" -30 to +5V ● for signal "1" +11 to +30V Input current ● for signal "0", max. (permissible quiescent current) 2 mA ● for signal "1", typ. 10 mA Input delay (for rated value of input voltage) for standard inputs — at "0" to "1", max. 3.4 ms — at "1" to "0", max. 3.4 ms Cable length ● shielded, max. 200 m ● unshielded, max.
PAGE 3
Isolation tested with 500 V DC/350 V AC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Highest safety class achievable in safety mode ● acc. to DIN VDE 0801 AK 6 ● acc. to EN 954 Cat. 4 ● SIL acc. to IEC 61508 SIL 3 Ambient conditions Ambient temperature during operation ● min. -25 °C; = Tmin ● max. 60 °C; = Tmax; *+70 °C where forced convection with a minimum air velocity of 0.
PAGE 4
— Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.