Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1326-1BK02-2AY0 PLC add-on module

Data sheet 6AG1326-1BK02-2AY0

SIPLUS S7-300 SM 326F DI24 with conformal coating With

conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES7326-

1BK02-0AB0 . Digital input Fail-safe digital input for SIMATIC S7 F-

systems with diagnostic alarm, 1x 40-pole

Supply voltage

Rated value (DC) 24V; A power supply according to EN 50155 shall be used

Input current

from load voltage L+ (without load), max. 450mA

from backplane bus 5 V DC, max. 100mA

Encoder supply

Number of outputs 4; Isolated

Output current

● Rated value

400mA

Power loss

Power loss, typ. 10W

Digital inputs

Number of digital inputs 24

Number of simultaneously controllable inputs

all mounting positions

— up to 40 °C, max.

6AG1326-1BK02-2AY0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1326-1BK02-2AY0 SIPLUS S7-300 SM 326F DI24 with conformal coating With conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES73261BK02-0AB0 . Digital input Fail-safe digital input for SIMATIC S7 Fsystems with diagnostic alarm, 1x 40-pole Supply voltage Rated value (DC) 24 V; A power supply according to EN 50155 shall be used Input current from load voltage L+ (without load), max. 450 mA from backplane bus 5 V DC, max.
PAGE 2
— up to 60 °C, max. 24; (at 24 V) or 18 (at 28.8 V) Input voltage ● Type of input voltage DC ● Rated value (DC) 24 V ● for signal "0" -28.8 ... +5V ● for signal "1" +11 to +28.8V Input current ● for signal "0", max. (permissible quiescent current) 2 mA ● for signal "1", typ. 10 mA Input delay (for rated value of input voltage) for standard inputs — at "0" to "1", max. 3.4 ms — at "1" to "0", max. 3.4 ms Cable length ● shielded, max. 200 m ● unshielded, max.
PAGE 3
Isolation Isolation tested with 500V AC for 1 min (internal voltage limiting to ±120V) Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 Highest safety class achievable in safety mode ● acc. to DIN VDE 0801 AK 6 ● acc. to EN 954 Cat. 4 ● SIL acc. to IEC 61508 SIL 3 Railway application ● EN 50155 Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B, EN 50155:2007 Ambient conditions Ambient temperature during operation ● min.
PAGE 4
Connection method required front connector 40-pin Dimensions Width 80 mm Height 125 mm Depth 120 mm Weights Weight, approx.