Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1326-2BF10-2AB0 PLC add-on module

Data sheet 6AG1326-2BF10-2AB0

SIPLUS S7-300 SM 326 10F-DO -25...+60°C (70°C with forced

convection) with conformal coating based on 6ES7326-2BF10-0AB0

. Digital output 24 V DC/2A PP, fail-safe digital output for SIMATIC

S7F systems, with diagnostic alarm, LVV, 1x 40-pole

Supply voltage

Rated value (DC) 24V; 1L+

Reverse polarity protection Yes

Load voltage L+

● Rated value (DC)

24V; 2L+, 3L+

● Reverse polarity protection

Input current

from supply voltage 1L+, max. 100mA

from load voltage 2L+ (without load), max. 100mA

from load voltage 3L+ (without load), max. 100mA

from backplane bus 5 V DC, max. 100mA

Power loss

Power loss, typ. 6W

Digital outputs

Number of digital outputs 10

Short-circuit protection Yes

6AG1326-2BF10-2AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1326-2BF10-2AB0 SIPLUS S7-300 SM 326 10F-DO -25...+60°C (70°C with forced convection) with conformal coating based on 6ES7326-2BF10-0AB0 . Digital output 24 V DC/2A PP, fail-safe digital output for SIMATIC S7F systems, with diagnostic alarm, LVV, 1x 40-pole Supply voltage Rated value (DC) 24 V; 1L+ Reverse polarity protection Yes Load voltage L+ ● Rated value (DC) 24 V; 2L+, 3L+ ● Reverse polarity protection No Input current from supply voltage 1L+, max.
PAGE 2
Switching capacity of the outputs ● on lamp load, max. 5W Output current ● for signal "1" rated value 2A ● for signal "1" permissible range for 0 to 40 °C, min. 7 mA ● for signal "1" permissible range for 0 to 40 °C, max. 2.4 A ● for signal "1" permissible range for 40 to 60 °C, min. 7 mA ● for signal "1" permissible range for 40 to 60 °C, max. 2.4 A ● for signal "0" residual current, max. 0.5 mA Switching frequency ● with resistive load, max. 25 Hz ● with inductive load, max.
PAGE 3
Isolation Isolation tested with 370V for 1 min Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Highest safety class achievable in safety mode ● acc. to EN 954 Cat. 4 ● SIL acc. to IEC 61508 SIL 3 Ambient conditions Ambient temperature during operation ● min. -25 °C ● max. 60 °C; = T max; *+70 °C when forced convection at a minimum air speed of 0.3 m/s through the modules is ensured.
PAGE 4
— Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.