Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1326-2BF10-2AB0 PLC add-on module

Isolation

Isolation tested with 370V for 1 min

Standards, approvals, certificates

CE mark Yes

UL approval Yes; File E239877

RCM (formerly C-TICK) Yes

KC approval Yes

EAC (formerly Gost-R) Yes

Highest safety class achievable in safety mode

● acc. to EN 954

Cat. 4

● SIL acc. to IEC 61508

SIL 3

Ambient conditions

Ambient temperature during operation

● min.

-25°C

● max.

60°C; = T max; *+70 °C when forced convection at a minimum air

speed of 0.3 m/s through the modules is ensured. If in the course

of maintenance or automatic diagnosis it is determined that the

admissible specified parameters have been exceeded, the

modules should be subjected to a proof test (function check) by

the manufacturer.

Altitude during operation relating to sea level

● Installation altitude above sea level, max.

2000m

● Ambient air temperature-barometric pressure-

altitude

Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Relative humidity

● With condensation, tested in accordance with

IEC 60068-2-38, max.

100%; RH incl. condensation/frost (no commissioning under

condensation conditions)

Resistance

Use in stationary industrial systems

— to biologically active substances according

to EN 60721-3-3

Yes; Class 3B2 mold, fungus and dry rot spores (with the

exception of fauna); Class 3B3 on request

— to chemically active substances according

to EN 60721-3-3

Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-

52 (severity degree 3); *

— to mechanically active substances

according to EN 60721-3-3

Yes; Class 3S4 incl. sand, dust, *

Use on ships/at sea

— to biologically active substances according

to EN 60721-3-6

Yes; Class 6B2 mold and fungal spores (excluding fauna); Class

6B3 on request

— to chemically active substances according

to EN 60721-3-6

Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-

52 (severity degree 3); *

— to mechanically active substances

according to EN 60721-3-6

Yes; Class 6S3 incl. sand, dust; *

Usage in industrial process technology

6AG1326-2BF10-2AB0 Subject to change without notice

Page 3/