Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1331-1KF02-7AB0 PLC add-on module

Data sheet 6AG1331-1KF02-7AB0

SIPLUS S7-300 SM331 8AE -25 ... +70°C with conformal coating

based on 6ES7331-1KF02-0AB0 . OPTICALLY ISOLATED, 8 AI, 13

BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LG-

NI1000, PTC / KTY, 66 MS MODULE UPDATE, 1 X 40 PIN

Input current

from backplane bus 5 V DC, max. 90mA

Power loss

Power loss, typ. 0.4W

Analog inputs

Number of analog inputs 8

● For resistance measurement

permissible input voltage for voltage input

(destruction limit), max.

30V; 12 V continuous, 30 V for max. 1 s

permissible input current for current input (destruction

limit), max.

40mA

Input ranges

● Voltage

Yes

● Current

Yes

● Thermocouple

● Resistance thermometer

Yes

● Resistance

Yes

6AG1331-1KF02-7AB0 Subject to change without notice

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 6AG1331-1KF02-7AB0 SIPLUS S7-300 SM331 8AE -25 ... +70°C with conformal coating based on 6ES7331-1KF02-0AB0 . OPTICALLY ISOLATED, 8 AI, 13 BIT RESOLUTION, U/I/RESISTANCE/PT100, NI100, NI1000, LGNI1000, PTC / KTY, 66 MS MODULE UPDATE, 1 X 40 PIN Input current from backplane bus 5 V DC, max. 90 mA Power loss Power loss, typ. 0.4 W Analog inputs Number of analog inputs ● For resistance measurement 8 8 permissible input voltage for voltage input (destruction limit), max.
PAGE 2
Input ranges (rated values), voltages ● 0 to +10 V Yes ● Input resistance (0 to 10 V) 100 kΩ ● 1 V to 5 V Yes ● Input resistance (1 V to 5 V) 100 kΩ ● 1 V to 10 V No ● -1 V to +1 V Yes ● Input resistance (-1 V to +1 V) 100 kΩ ● -10 V to +10 V Yes ● Input resistance (-10 V to +10 V) 100 kΩ ● -2.5 V to +2.
PAGE 3
Input ranges (rated values), resistance thermometer ● Cu 10 No ● Ni 100 Yes; Standard/climate ● Input resistance (Ni 100) 100 MΩ ● Ni 1000 Yes ● Input resistance (Ni 1000) 100 MΩ ● LG-Ni 1000 Yes; Standard/climate ● Input resistance (LG-Ni 1000) 100 MΩ ● Ni 120 No ● Ni 200 No ● Ni 500 No ● Pt 100 Yes; Standard/climate ● Input resistance (Pt 100) 100 MΩ ● Pt 1000 No ● Pt 200 No ● Pt 500 No Input ranges (rated values), resistors ● 0 to 150 ohms No ● 0 to 300 ohms No ● 0 to 60
PAGE 4
● for current measurement as 4-wire transducer Yes ● for resistance measurement with two-wire connection Yes ● for resistance measurement with three-wire connection Yes ● for resistance measurement with four-wire connection Yes Errors/accuracies Operational error limit in overall temperature range ● Voltage, relative to input range, (+/-) 0.6 %; ±0.6 % (±5 V, 10 V, 1 to 5 V, 0 to 10 V); ±0.5 % (±50 mV, 500 mV, 1 V) @ 0 ... +60 °C; ±0.7 % (±5 V, 10 V, 1 to 5 V, 0 to 10 V); ±0.
PAGE 5
Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Railway application ● EN 50121-4 No ● EN 50155 No Ambient conditions Ambient temperature during operation ● min. -25 °C ● max. 70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ...
PAGE 6
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 * The supplied plug covers must remain in place over the unused interfaces during operation! Connection method required front connector 40-pin Dimensions Width 40 mm Height 125 mm Depth 117 mm Weights Weight, approx.