Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1331-7NF00-2AB0 PLC add-on module

Data sheet 6AG1331-7NF00-2AB0

SIPLUS S7-300 SM 331 40-pole -25...+70°C with conformal coating

Conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES7331-

7NF00-0AB0 . Analog "input isolated ""8 AI; +/-5/10" V, 1-5 V, +/-20

mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.)

Input current

from backplane bus 5 V DC, max. 130mA

Power loss

Power loss, typ. 0.6W

Analog inputs

Number of analog inputs 8

permissible input voltage for voltage input

(destruction limit), max.

50V; Permanent

permissible input current for current input (destruction

limit), max.

32mA

Input ranges

● Voltage

Yes

● Current

Yes

● Thermocouple

● Resistance thermometer

● Resistance

Input ranges (rated values), voltages

6AG1331-7NF00-2AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1331-7NF00-2AB0 SIPLUS S7-300 SM 331 40-pole -25...+70°C with conformal coating Conformity with EN 50155 T1 Kat 1 Kl A/B based on 6ES73317NF00-0AB0 . Analog "input isolated ""8 AI; +/-5/10" V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.) Input current from backplane bus 5 V DC, max. 130 mA Power loss Power loss, typ. 0.6 W Analog inputs Number of analog inputs 8 permissible input voltage for voltage input (destruction limit), max.
PAGE 2
● 0 to +10 V No ● 1 V to 5 V Yes ● Input resistance (1 V to 5 V) 2 MΩ ● 1 V to 10 V No ● -1 V to +1 V No ● -10 V to +10 V Yes ● Input resistance (-10 V to +10 V) 2 MΩ ● -2.5 V to +2.
PAGE 3
● Ni 200 No ● Ni 500 No ● Pt 100 No ● Pt 1000 No ● Pt 200 No ● Pt 500 No Input ranges (rated values), resistors ● 0 to 150 ohms No ● 0 to 300 ohms No ● 0 to 600 ohms No ● 0 to 6000 ohms No Cable length ● shielded, max. 200 m Analog value generation for the inputs Measurement principle integrating Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), 16 bit; Unipolar: 15/15/15/15 bit; bipolar: 15 bit + sign/15 bit + max.
PAGE 4
● Diagnostic information readable Yes Diagnostics indication LED ● Group error SF (red) Yes Potential separation Potential separation analog inputs ● between the channels and backplane bus Yes Isolation Isolation tested with 500 V DC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Railway application ● EN 50121-4 No ● EN 50155 Yes; Sections 4, 5 and 12; no further agreements apply; T1, Categ
PAGE 5
— to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl. sand, dust, * Use on land craft, rail vehicles and special-purpose vehicles — to biologically active substances according to EN 60721-3-5 Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request — to chemically active substances according to EN 60721-3-5 Yes; Class 5C3 (RH < 75 %) incl. salt spray acc.