Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1331-7PF11-4AB0 PLC add-on module

Data sheet 6AG1331-7PF11-4AB0

SIPLUS S7-300 SM 331 8AI 40-pole with conformal coating based

on 6ES7331-7PF11-0AB0. Analog input isolated, 8 AI thermocouples

Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit,

50ms, 1x 40-pole

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 240mA

from backplane bus 5 V DC, max. 100mA

Power loss

Power loss, typ. 3W

Analog inputs

Number of analog inputs 8

permissible input voltage for voltage input

(destruction limit), max.

75V; 20 V DC permanent, 75 V DC for max. 1 s (duty factor 1:20)

Input ranges

● Voltage

● Current

6AG1331-7PF11-4AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1331-7PF11-4AB0 SIPLUS S7-300 SM 331 8AI 40-pole with conformal coating based on 6ES7331-7PF11-0AB0. Analog input isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 240 mA from backplane bus 5 V DC, max. 100 mA Power loss Power loss, typ.
PAGE 2
● Thermocouple Yes ● Resistance thermometer No ● Resistance No Input ranges (rated values), voltages ● 0 to +10 V No ● 1 V to 5 V No ● 1 V to 10 V No ● -1 V to +1 V No ● -10 V to +10 V No ● -2.5 V to +2.5 V No ● -250 mV to +250 mV No ● -5 V to +5 V No ● -50 mV to +50 mV No ● -500 mV to +500 mV No ● -80 mV to +80 mV No Input ranges (rated values), currents ● 0 to 20 mA No ● -10 mA to +10 mA No ● -20 mA to +20 mA No ● -3.2 mA to +3.
PAGE 3
● Ni 500 No ● Pt 100 No ● Pt 1000 No ● Pt 200 No ● Pt 500 No Input ranges (rated values), resistors ● 0 to 150 ohms No ● 0 to 300 ohms No ● 0 to 600 ohms No ● 0 to 6000 ohms No Thermocouple (TC) Temperature compensation — parameterizable Yes — internal temperature compensation Yes — external temperature compensation with Pt100 Yes — external temperature compensation with compensations socket Yes — for definable comparison point temperature Yes Characteristic linearization ● param
PAGE 4
● Limit value alarm Yes; Parameterizable ● Hardware interrupt Yes; Parameterizable, channels 0 to 7 Diagnostic messages ● Diagnostic information readable Yes Diagnostics indication LED ● Group error SF (red) Yes Potential separation Potential separation analog inputs ● between the channels and backplane bus Yes Isolation Isolation tested with 500 V DC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-
PAGE 5
— to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl. sand, dust, * Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl.