Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1331-7TB00-7AB0 PLC add-on module

Data sheet 6AG1331-7TB00-7AB0

SIPLUS DP SM 331 2AE HART -25...+70 °C with conformal coating

based on 6ES7331-7TB00-0AB0

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 180mA

from backplane bus 5 V DC, max. 100mA

Output voltage

Power supply to the transmitters

● present

Yes

● Rated value (DC)

15V; at 22 mA

● short-circuit proof

Yes; approx. 30 mA

● No-load voltage (DC)

29.6V

Power loss

Power loss, typ. 4.5W

Analog inputs

Number of analog inputs 2

6AG1331-7TB00-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1331-7TB00-7AB0 SIPLUS DP SM 331 2AE HART -25...+70 °C with conformal coating based on 6ES7331-7TB00-0AB0 Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 180 mA from backplane bus 5 V DC, max. 100 mA Output voltage Power supply to the transmitters ● present Yes ● Rated value (DC) 15 V; at 22 mA ● short-circuit proof Yes; approx. 30 mA ● No-load voltage (DC) 29.
PAGE 2
permissible input current for current input (destruction limit), max. 40 mA Input ranges (rated values), currents ● 0 to 20 mA Yes ● Input resistance (0 to 20 mA) 50 Ω ● 4 mA to 20 mA Yes ● Input resistance (4 mA to 20 mA) 50 Ω Cable length ● shielded, max. 400 m Analog value generation for the inputs Measurement principle Sigma Delta Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max.
PAGE 3
● Limit value alarm Yes; Parameterizable, channels 0 and 1 Diagnostic messages ● Diagnostic information readable Yes ● Overrange Yes; Red LED, signal ● Wire-break in signal transmitter cable Yes; Red LED, signal ● Short-circuit of the signal encoder cable Yes; Red LED, signal ● HART communication active Yes; green LED (H) Diagnostics indication LED ● Group error SF (red) Yes ● Channel fault indicator F (red) Yes Ex(i) characteristics Module for Ex(i) protection Yes Maximum values of input
PAGE 4
Ambient conditions Ambient temperature during operation ● min. -25 °C; = Tmin ● max. 70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use Ambient temperature during storage/transportation ● min. -40 °C ● max. 70 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ...
PAGE 5
Depth 120 mm Weights Weight, approx.