Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1332-1SH71-7AA0 PLC power supply

Data sheet 6AG1332-1SH71-7AA0

SIPLUS POWER MODUL PM1207

SIPLUS S7-1200 PM 1207 -25...+70 °C with conformal coating

based on 6EP1332-1SH71 . Stabilized power supplies Input: 120/230

V AC output: 24 V DC/2.5 A

Input

Input 1-phase AC

● Note

Automatic range selection

Supply voltage

● 1 at AC Rated value

120V

● 2 at AC Rated value

230V

Input voltage

● 1 at AC

85...132V

● 2 at AC

176...264V

Wide-range input No

Overvoltage resistance 2.3 × Vin rated, 1.3 ms

Mains buffering at Vin = 93/187 V

Mains buffering at Iout rated, min. 20ms; at Vin = 93/187 V

Rated line frequency 1 50Hz

Rated line frequency 2 60Hz

Rated line range 47...63Hz

Input current

6AG1332-1SH71-7AA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1332-1SH71-7AA0 SIPLUS POWER MODUL PM1207 SIPLUS S7-1200 PM 1207 -25...+70 °C with conformal coating based on 6EP1332-1SH71 . Stabilized power supplies Input: 120/230 V AC output: 24 V DC/2.5 A Input Input ● Note 1-phase AC Automatic range selection Supply voltage ● 1 at AC Rated value 120 V ● 2 at AC Rated value 230 V Input voltage ● 1 at AC 85 ... 132 V ● 2 at AC 176 ... 264 V Wide-range input No Overvoltage resistance 2.3 × Vin rated, 1.
PAGE 2
● at rated input voltage 120 V 1.2 A ● at rated input voltage 230 V 0.67 A Switch-on current limiting (+25 °C), max. 13 A Duration of inrush current limiting at 25 °C ● maximum 3 ms I²t, max. 0.
PAGE 3
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 3% Load step setting time 50 to 100%, typ. 5 ms Load step setting time 100 to 50%, typ. 5 ms Setting time maximum 5 ms Protection and monitoring Output overvoltage protection < 33 V Current limitation, typ. 2.65 A Property of the output Short-circuit proof Yes Short-circuit protection Constant current characteristic Enduring short circuit current RMS value ● typical Overload/short-circuit indicator 2.
PAGE 4
Ambient temperature during storage and transport -40 ... +85 Installation altitude at height above sea level maximum 6 000 m Ambient condition relating to ambient temperature air pressure - installation altitude In case of operation at altitudes of 2000 - 6000 m above sea level: Output power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5 K/1000 m Relative humidity with condensation acc. to IEC 60068-2-38 maximum 100 %; RH incl.
PAGE 5
Product feature of the enclosure housing for side-byside mounting Yes Installation Snaps onto DIN rail EN 60715 35x7.