Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1332-5HF00-2AB0 PLC add-on module

Data sheet 6AG1332-5HF00-2AB0

SIPLUS S7-300 SM332 40POLE -25...+70°C with conformal coating

based on 6ES7332-5HF00-0AB0 . ANALOG OUTPUT OPTICALLY

ISOLATED, 8 "AO, U/I; DIAGNOSTICS;" RESOLUTION 11/12 BITS,

40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 340mA

from backplane bus 5 V DC, max. 100mA

Power loss

Power loss, typ. 6W

Analog outputs

Number of analog outputs 8; 4 @ +70 °C

Voltage output, short-circuit protection Yes

Voltage output, short-circuit current, max. 25mA

Current output, no-load voltage, max. 18V

Output ranges, voltage

● 0 to 10 V

Yes

6AG1332-5HF00-2AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1332-5HF00-2AB0 SIPLUS S7-300 SM332 40POLE -25...+70°C with conformal coating based on 6ES7332-5HF00-0AB0 . ANALOG OUTPUT OPTICALLY ISOLATED, 8 "AO, U/I; DIAGNOSTICS;" RESOLUTION 11/12 BITS, 40 PIN, REMOVE/INSERT W. ACTIVE, BACKPLANE BUS Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 340 mA from backplane bus 5 V DC, max. 100 mA Power loss Power loss, typ.
PAGE 2
● 1 V to 5 V Yes ● -10 V to +10 V Yes Output ranges, current ● 0 to 20 mA Yes ● -20 mA to +20 mA Yes ● 4 mA to 20 mA Yes Load impedance (in rated range of output) ● with voltage outputs, min. 1 kΩ ● with voltage outputs, capacitive load, max. 1 µF ● with current outputs, max. 500 Ω ● with current outputs, inductive load, max. 10 mH Cable length ● shielded, max.
PAGE 3
● between the channels and backplane bus Yes Isolation Isolation tested with 500 V DC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Railway application ● EN 50121-4 No ● EN 50155 No Ambient conditions Ambient temperature during operation ● min. -25 °C ● max. 70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use Ambient temperature during storage/transportation ● min. -40 °C ● max.
PAGE 4
Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc.