Data Sheet

Data sheet 6AG1343-1EX30-7XE0

Product type designation SIPLUS NET CP 343-1

SIPLUS NET CP 343-1 -25...+70 °C with conformal coating based on

6GK7343-1EX30-0XE0 . Communications processor for connection

of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP,

PROFINET IO controller or PROFINET IO device, Integrated 2-port

switch ERTEC 200, S7 communication, fetch/write, Send/Receive

with and without RFC1006, MULTICAST DHCP, NTC-CPU Sync,

diagnostics, initialization via LAN, 2x RJ45 connection for LAN with

10/100 Mbit/s

Transmission rate

Transfer rate

● at the 1st interface

10...100Mbit/s

Interfaces

Number of interfaces / acc. to Industrial Ethernet 2

Number of electrical connections

● at the 1st interface / acc. to Industrial Ethernet

● for power supply

Type of electrical connection

● at the 1st interface / acc. to Industrial Ethernet

RJ45 port

● of Industrial Ethernet interface

RJ45 port

● for power supply

2-pole plugable terminal block

Supply voltage, current consumption, power loss

Type of voltage / of the supply voltage DC

Supply voltage / 1 / from backplane bus 5V

Supply voltage 24V

Supply voltage / external 24V

6AG1343-1EX30-7XE0 Subject to change without notice

Page 1/

PAGE 1
Data sheet Product type designation 6AG1343-1EX30-7XE0 SIPLUS NET CP 343-1 SIPLUS NET CP 343-1 -25...+70 °C with conformal coating based on 6GK7343-1EX30-0XE0 .
PAGE 2
Supply voltage / external / at DC / Rated value 24 V Relative positive tolerance / at DC / at 24 V 20 % Relative negative tolerance / at DC / at 24 V 15 % Consumed current ● from backplane bus / at DC / at 5 V / typical 0.2 A ● from external supply voltage / at DC / at 24 V / typical 0.16 A ● from external supply voltage / at DC / at 24 V / maximum 0.2 A Power loss [W] 5.8 W Ambient conditions Ambient temperature ● during operation -25 ...
PAGE 3
Protection class IP IP20 Design, dimensions and weight Module format Compact module S7-300 single width Width 40 mm Height 125 mm Depth 120 mm Net weight 0.
PAGE 4
Product functions / management, configuration Product function / MIB support Yes Protocol / is supported ● SNMP v1 Yes ● DCP Yes ● LLDP Yes Configuration software ● required STEP 7 V5.
PAGE 5
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a holistic industrial security concept. With this in mind, Siemens’ products and solutions undergo continuous development. Siemens recommends strongly that you regularly check for product updates.