Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1511-1FK01-2AB0 PLC CPU

Data sheet 6AG1511-1FK01-2AB0

SIPLUS S7-1500 CPU 1511F-1 PN -25...+60°C start up -20°C with

conformal coating based on 6ES7511-1FK01-0AB0 . Central

processing unit with Work memory 225 KB for program and 1 MB for

data, 1st interface: PROFINET IRT with 2-port switch, 60 ns bit

performance, SIMATIC Memory Card required

General information

Product type designation CPU 1511F-1 PN

HW functional status FS01

Firmware version V1.8

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 SP1 Update 4

Display

Screen diagonal [cm] 3.45cm

Control elements

Number of keys 6

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

6AG1511-1FK01-2AB0 Subject to change without notice

Page 1/

Summary of content (10 pages)

PAGE 1
Data sheet 6AG1511-1FK01-2AB0 SIPLUS S7-1500 CPU 1511F-1 PN -25...+60°C start up -20°C with conformal coating based on 6ES7511-1FK01-0AB0 . Central processing unit with Work memory 225 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 2-port switch, 60 ns bit performance, SIMATIC Memory Card required General information Product type designation CPU 1511F-1 PN HW functional status FS01 Firmware version V1.
PAGE 2
Reverse polarity protection Yes Mains buffering ● Mains/voltage failure stored energy time 5 ms Input current Current consumption (rated value) 0.7 A Inrush current, max. 1.9 A; Rated value I²t 0.02 A²·s Power Infeed power to the backplane bus 10 W Power consumption from the backplane bus (balanced) 5.5 W Power loss Power loss, typ. 5.
PAGE 3
● Size, max.
PAGE 4
Local data ● per priority class, max. 64 kbyte; max. 16 KB per block Address area Number of IO modules 1 024; max. number of modules / submodules I/O address area ● Inputs 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image per integrated IO subsystem — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte per CM/CP — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte Subprocess images ● Number of subprocess images, max.
PAGE 5
● on Ethernet via NTP Yes Interfaces Number of PROFINET interfaces 1 1.
PAGE 6
— Number of connectable IO Devices for RT, max. 128 — of which in line, max. 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8 — Number of IO Devices per tool, max.
PAGE 7
● S7 communication, as client Yes ● User data per job, max. See online help (S7 communication, user data size) Open IE communication ● TCP/IP Yes — Data length, max. 64 kbyte — several passive connections per port, supported Yes ● ISO-on-TCP (RFC1006) — Data length, max. ● UDP — Data length, max.
PAGE 8
Status/control ● Status/control variable Yes ● Variables Inputs, outputs, memory bits, DB, times, counters ● Number of variables, max. — of which status variables, max. 200; per job — of which control variables, max. 200; per job Forcing ● Forcing, variables Inputs, outputs ● Number of variables, max. 200 Diagnostic buffer ● present Yes ● Number of entries, max.
PAGE 9
Highest safety class achievable in safety mode ● Performance level according to ISO 13849-1 PLe ● SIL acc. to IEC 61508 SIL 3 Ambient conditions Ambient temperature during operation ● horizontal installation, min. -25 °C; = Tmin; startup @ -25 °C; startup display @ -20 °C ● horizontal installation, max. 60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off ● vertical installation, min.
PAGE 10
● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Configuration Programming Programming language — LAD Yes; incl. failsafe — FBD Yes; incl.