Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1512-1DK01-2AB0 PLC CPU

Data sheet 6AG1512-1DK01-2AB0

SIPLUS ET 200SP CPU 1512SP-1 PN -40...+60°C with conformal

coating based on 6ES7512-1DK01-0AB0 . CPU 1512SP-1 PN for ET

200SP, Central processing unit with Work memory 200 KB for

program and 1 MB for data, first interface: PROFINET IRT with 3-port

switch, 48 ns bit performance, SIMATIC Memory Card required,

BusAdapter required for port 1 and 2

General information

Product type designation CPU 1512SP-1 PN

Configuration control

via dataset Yes

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

Current consumption (rated value) 0.6A

Inrush current, max. 4.7A; Rated value

6AG1512-1DK01-2AB0 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 6AG1512-1DK01-2AB0 SIPLUS ET 200SP CPU 1512SP-1 PN -40...+60°C with conformal coating based on 6ES7512-1DK01-0AB0 .
PAGE 2
I²t 0.14 A²·s Power Infeed power to the backplane bus 8.75 W Power loss Power loss, typ. 5.6 W Memory Number of slots for SIMATIC memory card 1 SIMATIC memory card required Yes Work memory ● integrated (for program) 200 kbyte ● integrated (for data) 1 Mbyte Load memory ● Plug-in (SIMATIC Memory Card), max. 32 Gbyte Backup ● maintenance-free Yes CPU processing times for bit operations, typ. 48 ns for word operations, typ. 58 ns for fixed point arithmetic, typ.
PAGE 3
● Number of process alarm OBs 50 ● Number of DPV1 alarm OBs 3 ● Number of isochronous mode OBs 1 ● Number of technology synchronous alarm OBs 2 ● Number of startup OBs 100 ● Number of asynchronous error OBs 4 ● Number of synchronous error OBs 2 ● Number of diagnostic alarm OBs 1 Nesting depth ● per priority class 24 Counters, timers and their retentivity S7 counter ● Number 2 048 Retentivity — adjustable Yes IEC counter ● Number Any (only limited by the main memory) Retentivity — adj
PAGE 4
● Inputs 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image per integrated IO subsystem — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte per CM/CP — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte Subprocess images ● Number of subprocess images, max. 32 Address space per module ● Address space per module, max. 32 byte; For input and output data respectively Address space per station ● Address space per station, max.
PAGE 5
● on Ethernet via NTP Yes Interfaces Number of PROFINET interfaces 1 Number of PROFIBUS interfaces 1; Via CM DP module With optical interface Yes; Via BusAdapter BA 2x SCRJ 1. Interface Interface types ● Number of ports 3; 1. integr. + 2.
PAGE 6
● Number of connections via integrated interfaces 88 ● Number of S7 routing paths 16 PROFINET IO Controller Services — PG/OP communication Yes — S7 routing Yes — Isochronous mode Yes — Open IE communication Yes — IRT Yes — PROFIenergy Yes — Prioritized startup Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128; In total, up to 253 distributed I/O devices can be connected via PROFIBUS or PROFINET — Of which IO devices with IRT, max.
PAGE 7
Services — PG/OP communication Yes — S7 routing Yes — Isochronous mode No — Open IE communication Yes — IRT Yes — PROFIenergy Yes — Shared device Yes — Number of IO Controllers with shared device, max. 4 Redundancy mode ● MRP Yes; as MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50 SIMATIC communication ● S7 communication, as server Yes ● S7 communication, as client Yes ● User data per job, max.
PAGE 8
— Activation/deactivation of DP slaves Yes Further protocols ● MODBUS Yes; MODBUS TCP Media redundancy ● Switchover time on line break, typ. 200 ms ● Number of stations in the ring, max. 50 Isochronous mode Isochronous operation (application synchronized up to terminal) Yes; Only with PROFINET; with minimum OB 6x cycle of 625 µs S7 message functions Number of login stations for message functions, max. 32 Program alarms Yes Number of configurable program messages, max.
PAGE 9
Diagnostics indication LED ● RUN/STOP LED Yes ● ERROR LED Yes ● MAINT LED Yes ● Monitoring of the supply voltage (PWR-LED) Yes ● Connection display LINK TX/RX Yes Supported technology objects Motion Control Yes ● Speed-controlled axis — Number of speed-controlled axes, max.
PAGE 10
Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation Resistance Coolants and lubricants — Resistant to commercially available coolants and lubricants Yes; Incl.
PAGE 11
Configuration Programming Programming language — LAD Yes — FBD Yes — STL Yes — SCL Yes — GRAPH Yes Know-how protection ● User program protection/password protection Yes ● Copy protection Yes ● Block protection Yes Access protection ● Protection level: Write protection Yes ● Protection level: Read/write protection Yes ● Protection level: Complete protection Yes Cycle time monitoring ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Dimensions Wi