Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1512-1SK01-2AB0 PLC CPU

Data sheet 6AG1512-1SK01-2AB0

SIPLUS ET 200SP CPU 1512SP F-1P -25...+60°C start up -25°C

with conformal coating based on 6ES7512-1SK01-0AB0 . Central

processing unit with RAM 300 KB for program and 1 MB for data, 1st

interface: PROFINET IRT with 3-port switch, 48 ns bit performance,

SIMATIC Memory Card required, Bus Adapter required for Port 1 and

General information

Product type designation CPU 1512SP F-1 PN

HW functional status FS01

Firmware version V1.8

Configuration control

via dataset Yes

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

6AG1512-1SK01-2AB0 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 6AG1512-1SK01-2AB0 SIPLUS ET 200SP CPU 1512SP F-1P -25...+60°C start up -25°C with conformal coating based on 6ES7512-1SK01-0AB0 . Central processing unit with RAM 300 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 3-port switch, 48 ns bit performance, SIMATIC Memory Card required, Bus Adapter required for Port 1 and 2 General information Product type designation CPU 1512SP F-1 PN HW functional status FS01 Firmware version V1.
PAGE 2
Current consumption (rated value) 0.6 A Inrush current, max. 4.7 A; Rated value I²t 0.14 A²·s Power Infeed power to the backplane bus 8.75 W Power loss Power loss, typ. 5.6 W Memory Number of slots for SIMATIC memory card 1 SIMATIC memory card required Yes Work memory ● integrated (for program) 300 kbyte ● integrated (for data) 1 Mbyte Load memory ● Plug-in (SIMATIC Memory Card), max. 32 Gbyte Backup ● maintenance-free Yes CPU processing times for bit operations, typ.
PAGE 3
● Number of delay alarm OBs 20 ● Number of cyclic interrupt OBs 20 ● Number of process alarm OBs 50 ● Number of DPV1 alarm OBs 3 ● Number of isochronous mode OBs 1 ● Number of technology synchronous alarm OBs 2 ● Number of startup OBs 100 ● Number of asynchronous error OBs 4 ● Number of synchronous error OBs 2 ● Number of diagnostic alarm OBs 1 Nesting depth ● per priority class 24; Up to 8 possible for F-blocks Counters, timers and their retentivity S7 counter ● Number 2 048 Retenti
PAGE 4
Number of IO modules 2 048; max. number of modules / submodules I/O address area ● Inputs 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image per integrated IO subsystem — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte per CM/CP — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte Subprocess images ● Number of subprocess images, max. 32 Address space per module ● Address space per module, max.
PAGE 5
● in AS, master Yes ● in AS, slave Yes ● on Ethernet via NTP Yes Interfaces Number of PROFINET interfaces 1 Number of PROFIBUS interfaces 1; Via CM DP module 1. Interface Interface types ● Number of ports 3; 1. integr. + 2.
PAGE 6
● Number of connections via integrated interfaces 88 ● Number of S7 routing paths 16 PROFINET IO Controller Services — PG/OP communication Yes — S7 routing Yes — Isochronous mode Yes — Open IE communication Yes — IRT Yes — PROFIenergy Yes — Prioritized startup Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128; In total, up to 253 distributed I/O devices can be connected via PROFIBUS or PROFINET — Of which IO devices with IRT, max.
PAGE 7
— Open IE communication Yes — IRT Yes — PROFIenergy Yes — Shared device Yes — Number of IO Controllers with shared device, max. 4 Redundancy mode ● MRP Yes; as MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50 SIMATIC communication ● S7 communication, as server Yes ● S7 communication, as client Yes ● User data per job, max. See online help (S7 communication, user data size) Open IE communication ● TCP/IP Yes — Data length, max.
PAGE 8
● Switchover time on line break, typ. 200 ms ● Number of stations in the ring, max. 50 Isochronous mode Isochronous operation (application synchronized up to terminal) Yes; Only with PROFINET; with minimum OB 6x cycle of 625 µs S7 message functions Number of login stations for message functions, max. 32 Program alarms Yes Number of configurable program messages, max.
PAGE 9
● Connection display LINK TX/RX Yes Supported technology objects Motion Control Yes ● Speed-controlled axis — Number of speed-controlled axes, max. 6; Max. number of speed-controlled axes (requirement: there must be no other motion technology objects created) ● Positioning axis — Number of positioning axes, max. 6; Max. number of positioning axes (requirement: there must be no other motion technology objects created) ● Synchronized axes (relative gear synchronization) — Number of axes, max. 3; Max.
PAGE 10
— to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl. sand, dust, * — Against mechanical environmental conditions acc. to EN 60721-3-3 Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl.
PAGE 11
Access protection ● Protection level: Write protection Yes ● Protection level: Read/write protection Yes ● Protection level: Complete protection Yes Cycle time monitoring ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Dimensions Width 100 mm Height 117 mm Depth 75 mm Weights Weight, approx.