Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1518-4AP00-4AB0 PLC CPU

Data sheet 6AG1518-4AP00-4AB0

SIPLUS S7-1500 CPU 1518-4 PN/DP with conformal coating based

on 6ES7518-4AP00-0AB0 . Central processing unit with Work

memory 3 MB for Program and 10 MB for data, 1st interface,

PROFINET IRT with 2-port switch, 2nd interface, Ethernet, 3rd

interface, Ethernet, 4th interface, PROFIBUS, 1 ns bit-performance,

SIMATIC Memory Card required

General information

Product type designation CPU 1518-4 PN/DP

HW functional status FS01

Firmware version V1.5

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13

Display

Screen diagonal [cm] 6.1cm

Control elements

Number of keys 6

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

6AG1518-4AP00-4AB0 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 6AG1518-4AP00-4AB0 SIPLUS S7-1500 CPU 1518-4 PN/DP with conformal coating based on 6ES7518-4AP00-0AB0 . Central processing unit with Work memory 3 MB for Program and 10 MB for data, 1st interface, PROFINET IRT with 2-port switch, 2nd interface, Ethernet, 3rd interface, Ethernet, 4th interface, PROFIBUS, 1 ns bit-performance, SIMATIC Memory Card required General information Product type designation CPU 1518-4 PN/DP HW functional status FS01 Firmware version V1.
PAGE 2
Reverse polarity protection Yes Input current Current consumption (rated value) 1.55 A Inrush current, max. 2.4 A; Rated value I²t 0.45 A²·s Power Infeed power to the backplane bus 12 W Power consumption from the backplane bus (balanced) 30 W Power loss Power loss, typ. 24 W Memory SIMATIC memory card required Yes Work memory ● integrated (for program) 3 Mbyte ● integrated (for data) 10 Mbyte Load memory ● Plug-in (SIMATIC Memory Card), max.
PAGE 3
● Number of delay alarm OBs 20 ● Number of cyclic interrupt OBs 20 ● Number of process alarm OBs 50 ● Number of DPV1 alarm OBs 3 ● Number of isochronous mode OBs 2 ● Number of technology synchronous alarm OBs 2 ● Number of startup OBs 100 ● Number of asynchronous error OBs 4 ● Number of synchronous error OBs 2 ● Number of diagnostic alarm OBs 1 Nesting depth ● per priority class 24 Counters, timers and their retentivity S7 counter ● Number 2 048 Retentivity — adjustable Yes IEC cou
PAGE 4
Number of IO modules 8 192 I/O address area ● Inputs 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image per integrated IO subsystem — Inputs (volume) 16 kbyte; 16 KB via the integrated PROFINET IO interface, 8 KB via the integrated DP interface — Outputs (volume) 16 kbyte; 16 KB via the integrated PROFINET IO interface, 8 KB via the integrated DP interface per CM/CP — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte Subprocess images ● Numb
PAGE 5
● on Ethernet via NTP Yes Interfaces Number of PROFINET interfaces 3 Number of PROFIBUS interfaces 1 1. Interface Interface types ● Number of ports 2 ● integrated switch Yes ● RJ 45 (Ethernet) Yes Protocols ● PROFINET IO Controller Yes ● PROFINET IO Device Yes ● SIMATIC communication Yes ● Open IE communication Yes ● Web server Yes ● Media redundancy Yes 2.
PAGE 6
● Number of ports 1 ● RS 485 Yes Protocols ● PROFIBUS DP master Yes ● PROFIBUS DP slave No ● SIMATIC communication Yes Interface types RJ 45 (Ethernet) ● 100 Mbps Yes ● Autonegotiation Yes ● Autocrossing Yes ● Industrial Ethernet status LED Yes RS 485 ● Transmission rate, max. 12 Mbit/s Protocols Number of connections ● Number of connections, max.
PAGE 7
— Updating times The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data Update time for IRT — for send cycle of 250 µs 250 µs to 4 ms — for send cycle of 500 µs 500 µs to 8 ms — for send cycle of 1 ms 1 ms to 16 ms — for send cycle of 2 ms 2 ms to 32 ms — for send cycle of 4 ms 4 ms to 64 ms — With IRT and parameterization of "odd" send cycles Update time = set "odd" send clock (any m
PAGE 8
● UDP — Data length, max. Yes 1 472 byte ● DHCP No ● SNMP Yes ● DCP Yes ● LLDP Yes Web server ● HTTP Yes; Standard and user-defined pages ● HTTPS Yes; Standard and user-defined pages PROFIBUS DP master ● Number of connections, max.
PAGE 9
— of which control variables, max. 200; per job Forcing ● Forcing, variables Inputs, outputs ● Number of variables, max. 200 Diagnostic buffer ● present Yes ● Number of entries, max.
PAGE 10
● max. 70 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl.
PAGE 11
● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Configuration Programming Programming language — LAD Yes — FBD Yes — STL Yes — SCL Yes — GRAPH Yes Know-how protection ● User program protection/password protection Yes ● Copy protection Yes ● Block protection Yes Access protection ● Password for display Yes ● Protection level: Write protection Yes ● Protection level: Read/write protect