Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1521-1BH00-7AB0 PLC add-on module

Data sheet 6AG1521-1BH00-7AB0

SIPLUS S7-1500 DI 16x24 V DC HF -40...+70°C with conformal

coating based on 6ES7521-1BH00-0AB0 . Digital "input module ""16

channels in" "groups of 16;"" ""Input delay" "0.05..20ms ""Input type 3

(IEC" "61131);"" ""diagnostics; hardware" "interrupts"""

General information

HW functional status E01

Firmware version V1.0.0

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V12 / V12

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Input current

Current consumption, max. 20mA; with 24 V DC supply

6AG1521-1BH00-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1521-1BH00-7AB0 SIPLUS S7-1500 DI 16x24 V DC HF -40...+70°C with conformal coating based on 6ES7521-1BH00-0AB0 . Digital "input module ""16 channels in" "groups of 16;"" ""Input delay" "0.05..20ms ""Input type 3 (IEC" "61131);"" ""diagnostics; hardware" "interrupts""" General information HW functional status E01 Firmware version V1.0.
PAGE 2
Power Power available from the backplane bus 1.1 W Power loss Power loss, typ. 2.6 W Digital inputs Number of digital inputs 16 Source/sink input P-reading Input characteristic curve in accordance with IEC 61131, type 3 Yes Input voltage ● Rated value (DC) 24 V ● for signal "0" -30 to +5V ● for signal "1" +11 to +30V Input current ● for signal "1", typ. 2.5 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable Yes; 0.05 / 0.1 / 0.4 / 1.6 / 3.2 / 12.
PAGE 3
● Hardware interrupt Yes Diagnostic messages ● Monitoring the supply voltage Yes ● Wire-break Yes; to I < 350 µA ● Short-circuit No ● Fuse blown No Diagnostics indication LED ● RUN LED Yes; Green LED ● ERROR LED Yes; Red LED ● Monitoring of the supply voltage (PWR-LED) Yes; Green LED ● Channel status display Yes; Green LED ● for channel diagnostics Yes; Red LED ● for module diagnostics Yes; Red LED Potential separation Potential separation channels ● between the channels No ● between
PAGE 4
Resistance Coolants and lubricants — Resistant to commercially available coolants and lubricants Yes; Incl. diesel and oil droplets in the air Use in stationary industrial systems — to biologically active substances according to EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request — to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc.
PAGE 5
Weights Weight, approx.