Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1521-1BH50-7AA0 PLC anlauge input module

Data sheet 6AG1521-1BH50-7AA0

SIPLUS S7-1500 DI 16x24 V DC SRC -40...+70°C with conformal

coating based on 6ES7521-1BH50-0AA0 . Digital "input module ""DI

16x24 V DC," "source-input;"" ""16 channels in" "groups of 16;""

""Input delay 3.2" "ms;"" Input type 3 (IEC 61131)"

General information

Product function

● I&M data

Yes; I&M0 to I&M3

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Power

Power available from the backplane bus 0.9W

Power loss

Power loss, typ. 2.8W

Digital inputs

Number of digital inputs 16; > +60 °C, number of simultaneously controllable inputs max. 8

Source/sink input Yes; Sourcing

Input characteristic curve in accordance with IEC

61131, type 3

Yes

6AG1521-1BH50-7AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1521-1BH50-7AA0 SIPLUS S7-1500 DI 16x24 V DC SRC -40...+70°C with conformal coating based on 6ES7521-1BH50-0AA0 . Digital "input module ""DI 16x24 V DC," "source-input;"" ""16 channels in" "groups of 16;"" ""Input delay 3.2" "ms;"" Input type 3 (IEC 61131)" General information Product function ● I&M data Yes; I&M0 to I&M3 Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.
PAGE 2
Input voltage ● Rated value (DC) 24 V ● for signal "0" -5 to +30V ● for signal "1" -11 to -30V Input current ● for signal "1", typ. 4.5 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable No — at "0" to "1", min. 3 ms — at "0" to "1", max. 4 ms — at "1" to "0", min. 3 ms — at "1" to "0", max. 4 ms for interrupt inputs — parameterizable No Cable length ● shielded, max. 1 000 m ● unshielded, max.
PAGE 3
● for channel diagnostics No ● for module diagnostics No Potential separation Potential separation channels ● between the channels No ● between the channels, in groups of 16 ● between the channels and backplane bus Yes Permissible potential difference between different circuits 75 V DC/60 V AC Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Suitable for safety functions No Ambient conditions Ambient temperature during operation ● horizontal installatio
PAGE 4
— to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl. sand, dust; * Usage in industrial process technology — Against chemically active substances acc.