Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1521-1BL00-7AB0 PLC input card

Data sheet 6AG1521-1BL00-7AB0

SIPLUS S7-1500 DI 32X24VDC HF -40 ... +70°C with conformal

coating based on. Digital input module DI 32x24V DC HF, 32

channels in groups of 16 Input delay 0.05..20 ms Input type 3 (IEC

61131) diagnostics Hardware interrupts

General information

HW functional status E01

Firmware version V1.0.0

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V12 / V12

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Input current

Current consumption, max. 40mA; 20 mA per group with 24 V DC supply

6AG1521-1BL00-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1521-1BL00-7AB0 SIPLUS S7-1500 DI 32X24VDC HF -40 ... +70°C with conformal coating based on. Digital input module DI 32x24V DC HF, 32 channels in groups of 16 Input delay 0.05..20 ms Input type 3 (IEC 61131) diagnostics Hardware interrupts General information HW functional status E01 Firmware version V1.0.
PAGE 2
Power Power available from the backplane bus 1.1 W Power loss Power loss, typ. 4.2 W Digital inputs Number of digital inputs 32; > +60 °C, number of simultaneously controllable inputs max. 16 Source/sink input P-reading Input characteristic curve in accordance with IEC 61131, type 3 Yes Input voltage ● Rated value (DC) 24 V ● for signal "0" -30 to +5V ● for signal "1" +11 to +30V Input current ● for signal "1", typ. 2.
PAGE 3
● Diagnostic alarm Yes ● Hardware interrupt Yes Diagnostic messages ● Monitoring the supply voltage Yes ● Wire-break Yes; to I < 350 µA ● Short-circuit No ● Fuse blown No Diagnostics indication LED ● RUN LED Yes; Green LED ● ERROR LED Yes; Red LED ● Monitoring of the supply voltage (PWR-LED) Yes; Green LED ● Channel status display Yes; Green LED ● for channel diagnostics Yes; Red LED ● for module diagnostics Yes; Red LED Potential separation Potential separation channels ● between th
PAGE 4
● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation/frost (no commissioning under condensation conditions) Resistance Coolants and lubricants — Resistant to commercially available coolants and lubricants Yes; Incl.
PAGE 5
Depth 129 mm Weights Weight, approx.