Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1521-1FH00-7AA0 PLC anlauge input module

Data sheet 6AG1521-1FH00-7AA0

SIPLUS S7-1500 DI 16x230V AC BA -40...+70°C with conformal

coating based on 6ES7521-1FH00-0AA0 . Digital input module DI

16x230 V AC, "16 channels in groups of 4;" "Input delay 20ms; Input

type" 1 (IEC 61131)

General information

Product function

● I&M data

Yes; I&M0 to I&M3

Power

Power available from the backplane bus 1W

Power loss

Power loss, typ. 4.9W

Digital inputs

Number of digital inputs 16; > +60 °C, number of simultaneously controllable inputs max. 8

Input characteristic curve in accordance with IEC

61131, type 1

Yes

Input voltage

● Rated value (AC)

230V; 120/230 V AC (47 Hz to 63 Hz)

● for signal "0"

0V AC to 40V AC

● for signal "1"

79V AC to 264V AC

Input current

6AG1521-1FH00-7AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1521-1FH00-7AA0 SIPLUS S7-1500 DI 16x230V AC BA -40...+70°C with conformal coating based on 6ES7521-1FH00-0AA0 . Digital input module DI 16x230 V AC, "16 channels in groups of 4;" "Input delay 20ms; Input type" 1 (IEC 61131) General information Product function ● I&M data Yes; I&M0 to I&M3 Power Power available from the backplane bus 1W Power loss Power loss, typ. 4.9 W Digital inputs Number of digital inputs 16; > +60 °C, number of simultaneously controllable inputs max.
PAGE 2
● for signal "1", typ. 11 mA; At 230 V AC/50 Hz and 6.5 mA at 120 V AC/50 Hz Input delay (for rated value of input voltage) for standard inputs — parameterizable No — at "0" to "1", max. 25 ms — at "1" to "0", max. 25 ms for interrupt inputs — parameterizable No Cable length ● shielded, max. 1 000 m ● unshielded, max. 600 m Encoder Connectable encoders ● 2-wire sensor — permissible quiescent current (2-wire sensor), max.
PAGE 3
Permissible potential difference between different circuits 250 V AC between the channels and the backplane bus; 500 V AC between the channels Isolation Isolation tested with 2500 V DC Standards, approvals, certificates Suitable for safety functions No Ambient conditions Ambient temperature during operation ● horizontal installation, min. -40 °C; = Tmin (incl. condensation/frost) ● horizontal installation, max. 70 °C; = Tmax; > +60 °C number of simultaneously controllable inputs max.
PAGE 4
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.