Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1522-1BH01-7AB0 PLC add-on module

Data sheet 6AG1522-1BH01-7AB0

SIPLUS S7-1500 DQ 16X24VDC/0.5A -40 ... +70°C MIT conformal

coating based on 6ES7522-1BH01-0AB0 . 16 CHANNELS IN

GROUPS OF 8, 4 A "PER GROUP; SINGLE-CHANNEL"

"DIAGNOSIS; SUBSTITUTE VALUE"

General information

Firmware version

● FW update possible

Yes

Product function

● I&M data

Yes; I&M0 to I&M3

Operating mode

● DQ

Yes

● DQ with energy-saving function

● PWM

● Oversampling

● MSO

Yes

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes; through internal protection with 7 A per group

Input current

Current consumption, max. 30mA

6AG1522-1BH01-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1522-1BH01-7AB0 SIPLUS S7-1500 DQ 16X24VDC/0.5A -40 ... +70°C MIT conformal coating based on 6ES7522-1BH01-0AB0 .
PAGE 2
Output voltage Rated value (DC) 24 V Power Power available from the backplane bus 1.1 W Power loss Power loss, typ. 2W Digital outputs Type of digital output Transistor Number of digital outputs 16 Current-sourcing Yes Digital outputs, parameterizable Yes Short-circuit protection Yes; Clocked electronically ● Response threshold, typ. 1A Limitation of inductive shutdown voltage to L+ (-53 V) Controlling a digital input Yes Switching capacity of the outputs ● with resistive load, max.
PAGE 3
● Current per module, max. 8 A; see additional description in the manual Cable length ● shielded, max. 1 000 m ● unshielded, max. 600 m Isochronous mode Isochronous operation (application synchronized up to terminal) Yes Execution and activation time (TCO), min. 70 µs Bus cycle time (TDP), min.
PAGE 4
Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl.
PAGE 5
● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Decentralized operation Prioritized startup Yes Dimensions Width 35 mm Height 147 mm Depth 129 mm Weights Weight, approx.