Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1522-5FF00-7AB0 PLC output card

Data sheet 6AG1522-5FF00-7AB0

SIPLUS S7-1500 DO 8x230V AC/2A -40...+70°C with conformal

coating based on 6ES7522-5FF00-0AB0 . Digital "output module

""DQ 8xAC 230V/2A;" "TRIAC;"" ""8 channels in groups" "of 1;"" ""2 A

per group;""" Substitute value

General information

Product function

● I&M data

Yes; I&M0 to I&M3

Output voltage

Rated value (AC) 120/230 V AC, 50/60 Hz

Power

Power available from the backplane bus 0.9W

Power loss

Power loss, typ. 10.8W

Digital outputs

Type of digital output Triac

Number of digital outputs 8; > +60 °C number of simultaneously controllable outputs max.

8x 0.25 A, max. total current 2 A

Digital outputs, parameterizable Yes

Size of motor starters according to NEMA, max. 5

Switching capacity of the outputs

6AG1522-5FF00-7AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1522-5FF00-7AB0 SIPLUS S7-1500 DO 8x230V AC/2A -40...+70°C with conformal coating based on 6ES7522-5FF00-0AB0 . Digital "output module ""DQ 8xAC 230V/2A;" "TRIAC;"" ""8 channels in groups" "of 1;"" ""2 A per group;""" Substitute value General information Product function ● I&M data Yes; I&M0 to I&M3 Output voltage Rated value (AC) 120/230 V AC, 50/60 Hz Power Power available from the backplane bus 0.9 W Power loss Power loss, typ. 10.
PAGE 2
● with resistive load, max. 2A ● on lamp load, max. 50 W Output voltage ● for signal "1", min. L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current Output current ● for signal "1" rated value 2A ● for signal "1" permissible range, min. 10 mA ● for signal "1" permissible range, max. 15 A; max. 1 AC cycle ● for signal "0" residual current, max. 2 mA Output delay with resistive load ● "0" to "1", max. 1 AC cycle ● "1" to "0", max.
PAGE 3
● Short-circuit No ● Fuse blown No Diagnostics indication LED ● RUN LED Yes; Green LED ● ERROR LED Yes; Red LED ● Monitoring of the supply voltage (PWR-LED) No ● Channel status display Yes; Green LED ● for channel diagnostics No ● for module diagnostics Yes; Red LED Potential separation Potential separation channels ● between the channels Yes ● between the channels, in groups of 1 ● between the channels and backplane bus Yes ● Between the channels and load voltage L1 Yes Permissible
PAGE 4
— to biologically active substances according to EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request — to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl.