Data Sheet

Cable length
● shielded, max.
1000m
● unshielded, max.
600m
Isochronous mode
Isochronous operation (application synchronized up
to terminal)
No
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm
Yes
Diagnostic messages
● Monitoring the supply voltage
Yes
● Wire-break
No
● Short-circuit
No
Diagnostics indication LED
● RUN LED
Yes; Green LED
● ERROR LED
Yes; Red LED
● Monitoring of the supply voltage (PWR-LED)
Yes; Green LED
● Channel status display
Yes; Green LED
● for channel diagnostics
No
● for module diagnostics
Yes; Red LED
Potential separation
Potential separation channels
● between the channels
Yes; Switching of different phases permitted
● between the channels, in groups of
1
● between the channels and backplane bus
Yes
● Between the channels and load voltage L+
Yes
Permissible potential difference
between different circuits 75 V DC/60 V AC (base isolation) between backplane bus and the
supply voltage L+; 250 V AC between the channels and the
supply voltage L+; 250 V AC between the channels and the
backplane bus; 500 V AC between the channels
Isolation
Isolation tested with Between the channels: 2 500 V DC; between the channels and
backplane bus: 2 500 V DC; between L+ backplane bus 707 V DC
(type test)
Standards, approvals, certificates
Suitable for safety functions No
Ambient conditions
6AG1522-5HF00-2AB0 Subject to change without notice
Page 3/
5
09/16/2019 © Copyright Siemens