Data Sheet

● Contact connection (internal)
No
● Number of operating cycles, max.
see additional description in the manual
● Relay approved acc. to UL 508
No
Switching capacity of contacts
— with inductive load, max.
2A; see additional description in the manual
— with resistive load, max.
2A; see additional description in the manual
Cable length
● shielded, max.
1000m
● unshielded, max.
600m
Isochronous mode
Isochronous operation (application synchronized up
to terminal)
No
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable Yes
Alarms
● Diagnostic alarm
Yes
Diagnostic messages
● Monitoring the supply voltage
Yes
● Wire-break
No
● Short-circuit
No
Diagnostics indication LED
● RUN LED
Yes; Green LED
● ERROR LED
Yes; Red LED
● Monitoring of the supply voltage (PWR-LED)
Yes; Green LED
● Channel status display
Yes; Green LED
● for channel diagnostics
No
● for module diagnostics
Yes; Red LED
Potential separation
Potential separation channels
● between the channels
No
● between the channels, in groups of
2
● between the channels and backplane bus
Yes
● Between the channels and load voltage L+
Yes
Permissible potential difference
between different circuits 250 V AC between the channels and the supply voltage L+; 250 V
AC between the channels and the backplane bus; 500 V AC
between the channels
Isolation
6AG1522-5HH00-7AB0 Subject to change without notice
Page 3/
5
09/15/2019 © Copyright Siemens