Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1522-5HH00-7AB0 PLC add-on module

Data sheet 6AG1522-5HH00-7AB0

SIPLUS S7-1500 16DQ 230VAC 2A RLY -40 ... +70°C start up -25

°C with conformal coating based on 6ES7522-5HH00-0AB0. Digital

output module DQ 16 X "230VAC / 2A ST; RELAY; 16" channels in

groups of 2, 4A per "group; Diagnosois;"

General information

Firmware version

● FW update possible

Yes

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

● PROFINET as of GSD version/GSD revision

V2.3 / -

Operating mode

● DQ

Yes

● DQ with energy-saving function

● PWM

● Oversampling

● MSO

Yes

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

6AG1522-5HH00-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1522-5HH00-7AB0 SIPLUS S7-1500 16DQ 230VAC 2A RLY -40 ... +70°C start up -25 °C with conformal coating based on 6ES7522-5HH00-0AB0. Digital output module DQ 16 X "230VAC / 2A ST; RELAY; 16" channels in groups of 2, 4A per "group; Diagnosois;" General information Firmware version ● FW update possible Yes Product function ● I&M data Yes; I&M0 to I&M3 Engineering with ● PROFIBUS as of GSD version/GSD revision V1.0 / V5.1 ● PROFINET as of GSD version/GSD revision V2.
PAGE 2
Reverse polarity protection Yes Input current Current consumption, max. 150 mA Power Power available from the backplane bus 0.8 W Power loss Power loss, typ. 5W Digital outputs Type of digital output Relays Number of digital outputs 16 Current-sinking Yes Current-sourcing Yes Digital outputs, parameterizable Yes Short-circuit protection No Controlling a digital input Yes Size of motor starters according to NEMA, max. 5 Switching capacity of the outputs ● on lamp load, max.
PAGE 3
● Contact connection (internal) No ● Number of operating cycles, max. see additional description in the manual ● Relay approved acc. to UL 508 No Switching capacity of contacts — with inductive load, max. 2 A; see additional description in the manual — with resistive load, max. 2 A; see additional description in the manual Cable length ● shielded, max. 1 000 m ● unshielded, max.
PAGE 4
Isolation tested with Between the channels: 2 500 V DC; between the channels and backplane bus: 2 500 V DC; between L+ backplane bus 707 V DC (type test) Standards, approvals, certificates Suitable for safety functions No Ambient conditions Ambient temperature during operation ● horizontal installation, min. -40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C ● horizontal installation, max. 70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max.
PAGE 5
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 * The supplied plug covers must remain in place over the unused interfaces during operation! Conformal coating ● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high availability ● Protection against fouling acc.