Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1531-7KF00-7AB0 PLC input card

Data sheet 6AG1531-7KF00-7AB0

SIPLUS S7-1500 AI 8xU/I/RTD/TC -40°C ... +70°C with conformal

coating based on 6ES7531-7KF00-0AB0 . Analog input module 16

bit resolution, Accuracy 0.3%, 8 channels in "groups of 8, ""Common

mode" "voltage 10 V;"" ""diagnostics;" "hardware interrupts"" incl."

infeed element, Shield bracket and shield terminal

General information

Product type designation AI 8xU/I/RTD/TC ST

Product function

● I&M data

Yes; I&M0 to I&M3

CiR – Configuration in RUN

Reparameterization possible in RUN Yes

Calibration possible in RUN Yes

Supply voltage

Type of supply voltage DC

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Encoder supply

24 V encoder supply

● Short-circuit protection

Yes

● Output current, max.

53mA

6AG1531-7KF00-7AB0 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 6AG1531-7KF00-7AB0 SIPLUS S7-1500 AI 8xU/I/RTD/TC -40°C ... +70°C with conformal coating based on 6ES7531-7KF00-0AB0 . Analog input module 16 bit resolution, Accuracy 0.3%, 8 channels in "groups of 8, ""Common mode" "voltage 10 V;"" ""diagnostics;" "hardware interrupts"" incl.
PAGE 2
Power Power available from the backplane bus 0.7 W Power loss Power loss, typ. 2.7 W Analog inputs Number of analog inputs 8; > +60 °C max. 2x ±20 mA or 4x ±10 V or 4x RTD permissible ● For current measurement 8 ● For voltage measurement 8 ● For resistance/resistance thermometer measurement 4 ● For thermocouple measurement 8 permissible input voltage for voltage input (destruction limit), max. 28.8 V permissible input current for current input (destruction limit), max.
PAGE 3
● 4 mA to 20 mA Yes ● Input resistance (4 mA to 20 mA) 25 Ω; Plus approx.
PAGE 4
● 0 to 6000 ohms Yes ● Input resistance (0 to 6000 ohms) 10 MΩ ● PTC Yes ● Input resistance (PTC) 10 MΩ Thermocouple (TC) Temperature compensation — external temperature compensation via RTD Yes — Compensation for 0 °C reference point temperature Yes; fixed value can be set Cable length ● shielded, max.
PAGE 5
● Resistance, relative to input range, (+/-) 0.1 % ● Resistance thermometer, relative to input range, (+/-) Ptxxx standard: ±0.7 K, Ptxxx climate: ±0.2 K, Nixxx standard: ±0.3 K, Nixxx climate: ±0.15 K ● Thermocouple, relative to input range, (+/-) Type B: > 600 °C ±1.7 K, type E: > -200 °C ±0.7 K, type J: > -210 °C ±0.8 K, type K: > -200 °C ±1.2 K, type N: > -200 °C ±1.2 K, type R: > 0 °C ±1.9 K, type S: > 0 °C ±1.9 K, type T: > -200 °C ±0.
PAGE 6
Ambient conditions Ambient temperature during operation ● horizontal installation, min. -40 °C; = Tmin (incl. condensation/frost) ● horizontal installation, max. 70 °C; = Tmax ● vertical installation, min. -40 °C; = Tmin ● vertical installation, max. 40 °C; = Tmax Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ...
PAGE 7
● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high availability ● Protection against fouling acc.