Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1531-7NF10-7AB0 PLC anlauge input module

Data sheet 6AG1531-7NF10-7AB0

SIPLUS S7-1500 AI 8xU/I HS -40 °C ... +70°C with conformal coating

based on 6ES7531-7NF10-0AB0 . Analog input module AI 8xU/I HS,

16 bit resolution, Accuracy 0.4% 8 channels in groups of 8, "Common

mode voltage 10 V;" "diagnostics; hardware" "interrupts"" 8 channels

in 0.125" ms incl. infeed element, Shield bracket and shield terminal

General information

Product type designation AI 8xU/I HS

Product function

● I&M data

Yes

Supply voltage

Type of supply voltage DC

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Encoder supply

24 V encoder supply

● Short-circuit protection

Yes

● Output current, max.

53mA

Power

Power available from the backplane bus 1.2W

Power loss

6AG1531-7NF10-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1531-7NF10-7AB0 SIPLUS S7-1500 AI 8xU/I HS -40 °C ... +70°C with conformal coating based on 6ES7531-7NF10-0AB0 . Analog input module AI 8xU/I HS, 16 bit resolution, Accuracy 0.4% 8 channels in groups of 8, "Common mode voltage 10 V;" "diagnostics; hardware" "interrupts"" 8 channels in 0.125" ms incl.
PAGE 2
Power loss, typ. 3.4 W Analog inputs Number of analog inputs 8; > +60 °C max. 4x ±20 mA or 4x ±10 V permissible ● For current measurement 8 ● For voltage measurement 8 permissible input voltage for voltage input (destruction limit), max. 28.8 V permissible input current for current input (destruction limit), max.
PAGE 3
● Voltage, relative to input range, (+/-) 0.2 % ● Current, relative to input range, (+/-) 0.2 % Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency ● Common mode voltage, max. 10 V ● Common mode interference, min. 60 dB; at 400 Hz: 50 dB Isochronous mode Isochronous operation (application synchronized up to terminal) Yes Filtering and processing time (TCI), min. 80 µs Bus cycle time (TDP), min. 250 µs Jitter, max.
PAGE 4
● horizontal installation, max. 70 °C; = Tmax ● vertical installation, min. -40 °C; = Tmin ● vertical installation, max. 40 °C; = Tmax Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ...
PAGE 5
● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Dimensions Width 35 mm Height 147 mm Depth 129 mm Weights Weight, approx.