Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1532-5HF00-7AB0 PLC digital ouput module

Data sheet 6AG1532-5HF00-7AB0

SIPLUS S7-1500 AQ 8xU/I HS -40...+70 °C Start up -25 °C with

conformal coating based on 6ES7532-5HF00-0AB0 . Analog output

module AQ8xU/I HS, 16 bit resolution, Accuracy 0.4%, 8 channels in

groups of 8, "diagnostics; substitute value" 8 channels in 0.125 ms

incl. infeed element, Shield bracket and shield terminal

General information

Product type designation AQ 8xU/I HS

Product function

● I&M data

Yes; I&M0 to I&M3

CiR – Configuration in RUN

Reparameterization possible in RUN Yes

Calibration possible in RUN Yes

Supply voltage

Type of supply voltage DC

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Input current

Current consumption, max. 260mA; with 24 V DC supply

Power

Power available from the backplane bus 1.15W

6AG1532-5HF00-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1532-5HF00-7AB0 SIPLUS S7-1500 AQ 8xU/I HS -40...+70 °C Start up -25 °C with conformal coating based on 6ES7532-5HF00-0AB0 . Analog output module AQ8xU/I HS, 16 bit resolution, Accuracy 0.4%, 8 channels in groups of 8, "diagnostics; substitute value" 8 channels in 0.125 ms incl.
PAGE 2
Power loss Power loss, typ. 7W Analog outputs Number of analog outputs 8; > +60 °C max. 4x ±10 V permissible Voltage output, short-circuit protection Yes Voltage output, short-circuit current, max. 45 mA Current output, no-load voltage, max. 20 V Cycle time (all channels), min.
PAGE 3
Crosstalk between the outputs, max. -100 dB Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) 0.05 % Operational error limit in overall temperature range ● Voltage, relative to output range, (+/-) 0.4 % ● Current, relative to output range, (+/-) 0.4 % Basic error limit (operational limit at 25 °C) ● Voltage, relative to output range, (+/-) 0.2 % ● Current, relative to output range, (+/-) 0.
PAGE 4
Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation ● horizontal installation, min. -40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C ● horizontal installation, max. 70 °C; = Tmax; > +60 °C max. 4x ±10 V permissible ● vertical installation, min. -40 °C; = Tmin; Startup @ -25 °C ● vertical installation, max. 40 °C; = Tmax Altitude during operation relating to sea level ● Installation altitude above sea level, max.
PAGE 5
Conformal coating ● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high availability ● Protection against fouling acc.