Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1677-2AA40-4AA0 PLC CPU

Data sheet 6AG1677-2AA40-4AA0

SIPLUS ET 200SP CPU 1515SP PC SPARE 4GB 0 ... +60°C with

conformal coating based on 6ES7677-2AA40-0AA0. CPU 1515SP

PC. spare part 4 GB RAM,without CFast, Interfaces: 1x slot CFAST,

1x slot SD/MMC, 1x connection for ET 200SP Bus- Adapter

PROFINET, 1x 10/100/1000 Mbit/s Ethernet 3x USB, 1x DVI-I

graphics card connection

General information

Product type designation CPU 1515SP PC

HW functional status FS03

Installed software

● Visualization

● Control

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

Current consumption (rated value) 1.5A; Full processor load, incl. ET 200SP modules and using

USB

6AG1677-2AA40-4AA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1677-2AA40-4AA0 SIPLUS ET 200SP CPU 1515SP PC SPARE 4GB 0 ... +60°C with conformal coating based on 6ES7677-2AA40-0AA0. CPU 1515SP PC.
PAGE 2
Current consumption (in no-load operation), typ. 0.6 A Inrush current, max. 4.7 A; Rated value Power Active power input, max. 36 W; incl. ET 200SP modules and using USB Infeed power to the backplane bus 8.75 W Power loss Power loss, typ.
PAGE 3
● integrated switch Yes ● RJ 45 (Ethernet) Yes; Via BusAdapter BA 2x RJ45 — Transmission rate, max. 100 Mbit/s — Industrial Ethernet status LED Yes 2. Interface Interface type Integrated Ethernet interface automatic detection of transmission rate Yes Autonegotiation Yes Autocrossing Yes Interface types ● Number of ports 1 ● RJ 45 (Ethernet) Yes; Integrated — Transmission rate, max. 1 000 Mbit/s — Industrial Ethernet status LED No Interface types RS 485 ● Transmission rate, max.
PAGE 4
● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation Vibrations ● Operation, tested according to IEC 60068-2-6 Yes ● Transport, tested acc. to IEC 60068-2-6 Yes Shock testing ● tested according to IEC 60068-2-6 Yes ● tested according to IEC 60068-2-27 Yes ● tested according to IEC 60068-2-29 Yes ● Storage/transport, tested acc.
PAGE 5
● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high availability ● Protection against fouling acc.