Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1803-3BA00-7AA0 PLC add-on module

Data sheet 6AG1803-3BA00-7AA0

Product type designation SIPLUS NET TIM 3V-IE DNP3

SIPLUS NET TIM 3V-IE DNP3 for medial exposure -25...+70°C

based on 6NH7803-3BA00-0AA0 communication module for

SIMATIC S7-300 with an RS232 interface

Interfaces

Number of interfaces / acc. to Industrial Ethernet 1

Number of electrical connections

● for power supply

Type of electrical connection

● for power supply

2-pole plugable terminal block

design of the removable storage / C-PLUG No

Supply voltage, current consumption, power loss

Type of voltage / of the supply voltage DC

Consumed current

● from external supply voltage / at DC / at 24 V /

maximum

0.2A

Power loss [W] 5.8W

Ambient conditions

Ambient temperature

● during operation

0...60°C

6AG1803-3BA00-7AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet Product type designation 6AG1803-3BA00-7AA0 SIPLUS NET TIM 3V-IE DNP3 SIPLUS NET TIM 3V-IE DNP3 for medial exposure -25...+70°C based on 6NH7803-3BA00-0AA0 communication module for SIMATIC S7-300 with an RS232 interface Interfaces Number of interfaces / acc.
PAGE 2
● during storage -40 ... +70 °C ● during transport -40 ... +70 °C ● in horizontal mounting position / during operation 70 ... -25 °C ● during storage and transport 70 ... -40 °C Installation altitude / at height above sea level / maximum 5000 m Relative humidity ● at 25 °C / without condensation / during operation / maximum 95 % ● with condensation / maximum 100 %; r.F., incl. condensation/frost permitted (no commissioning in bedewed state) ● with condensation / acc.
PAGE 3
Performance data / S7 communication Number of possible connections / for S7 communication ● maximum 3 ● with PG connections / maximum 2 ● Note only via LAN Performance data / telecontrol Suitability for use ● Node station Yes ● substation Yes ● TIM control center Yes Protocol / is supported ● DNP3 Product function / data buffering if connection is aborted Yes Yes; 64,000 data points with one master Product functions / management, configuration Configuration software ● required SINAUT ST7 ES
PAGE 4
Security information Siemens provides products and solutions with industrial security functions that support the secure operation of plants, solutions, machines, equipment and/or networks. They are important components in a comprehensive industrial security concept. Siemens products and solutions undergo continuous development with this factor in mind. Siemens recommends strongly that you regularly check for product updates.