Data Sheet

Data sheet 6AG1961-2BA41-7AA0

SIPLUS PS PSE200U 10A

SIPLUS PS PSE200U 10 A with conformal coating based on

6EP1961-2BA41 . SELECTIVITY module 4-channel 4-channel input:

24 V DC Output: 24 V DC/10 A per channel output current adjustable

3-10 with status message per channel

Input

Type of the power supply network Controlled DC voltage

Supply voltage / at DC / Rated value 24V

Input voltage / at DC 22...30V

Overvoltage overload capability 35 V

Input current / at rated input voltage 24 V / Rated

value

40A

Output

Voltage curve / at output controlled DC voltage

Formula for output voltage Vin - approx. 0.2 V

Relative overall tolerance / of the voltage / Note In accordance with the supplying input voltage

Number of outputs 4

Output current / up to 60 °C / per output / rated value 10A

Adjustable pick-up value current / of the current-

dependent overload release

3...10A

Type of response value setting via potentiometer

Product feature / parallel switching of outputs No

Product feature / bridging of equipments Yes

6AG1961-2BA41-7AA0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1961-2BA41-7AA0 SIPLUS PS PSE200U 10A SIPLUS PS PSE200U 10 A with conformal coating based on 6EP1961-2BA41 . SELECTIVITY module 4-channel 4-channel input: 24 V DC Output: 24 V DC/10 A per channel output current adjustable 3-10 with status message per channel Input Type of the power supply network Controlled DC voltage Supply voltage / at DC / Rated value 24 V Input voltage / at DC 22 ...
PAGE 2
Type of outputs connection Simultaneous connection of all outputs after power up of the supply voltage > 20 V, delay time of 25 ms, 100 ms or adjustable "load optimised" via DIP switch for sequential connection Efficiency Efficiency in percent 99 % Power loss [W] / at rated output current / for rated value of the output current / typical 10 W Switch-off characteristic per output Switching characteristic ● of the excess current Iout = 1.0 ...1.5 x set value, switch-off after approx.
PAGE 3
Ambient condition / relating to ambient temperature air pressure - installation altitude In case of operation at altitudes of 2000 - 6000 m above sea level: Output power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5 K/1000 m Resistance to biologically active substances / conformity acc. to EN 60721-3-3 Yes; Class 3B2 mold, fungal, sponge spores (except fauna); class 3B3 upon request Resistance to chemically active substances / conformity acc.