Data Sheet

Data sheet 6AG1964-2AA04-7AB0

SIPLUS S7-400 IF 964-DP -25...+70°C with conformal coating based

on 6ES7964-2AA04-0AB0 . Interface module DP master

Input current

Current consumption, max. 150mA; Current consumption from S7-400 bus: The module uses

no current at 24 V, it provides this voltage only at the DP interface.

Total current consumption of the components connected to the

DP interface, but maximum 150 mA. Current carrying capacity of

the isolated 5 V (P5ext) maximum 90 mA, current carrying

capacity of the 24 V maximum 150 mA.

Power loss

Power loss, typ. 1W

Interfaces

PROFIBUS DP

● Cable length, max.

1200m; At 9.6 kbit/s: max. 1 200 m; at 12 Mbit/s: max. 100 m

1. Interface

Isolated Yes

Protocols

● PROFIBUS DP master

Yes; Default setting

● PROFIBUS DP slave

Yes

PROFIBUS DP master

6AG1964-2AA04-7AB0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1964-2AA04-7AB0 SIPLUS S7-400 IF 964-DP -25...+70°C with conformal coating based on 6ES7964-2AA04-0AB0 . Interface module DP master Input current Current consumption, max. 150 mA; Current consumption from S7-400 bus: The module uses no current at 24 V, it provides this voltage only at the DP interface. Total current consumption of the components connected to the DP interface, but maximum 150 mA.
PAGE 2
● Transmission rate, max. 12 Mbit/s ● Number of DP slaves, max. 125; depending on the CPU used Services — PG/OP communication Yes — Equidistance Yes — SYNC/FREEZE Yes — Direct data exchange (slave-to-slave communication) Yes Address area — Inputs, max. device-dependent — Outputs, max. device-dependent User data per DP slave — Inputs, max. 244 byte — Outputs, max.
PAGE 3
— to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl. sand, dust; * Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.