Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6AG2132-6BF00-4CA0

Data sheet 6AG2132-6BF00-4CA0

SIPLUS ET 200SP DQ 8X24VDC/ 0.5A TX RAIL -40 ... +70°C TX

with 85°C for 10 minutes with conformal coating based on 6ES7132-

6BF00-0CA0 . Fits BU type A0, Color code CC02, Channel Diagnose

General information

Product type designation DQ 8x24 VDC/0.5 A ST

Firmware version

● FW update possible

Yes

usable BaseUnits BU type A0

Color code for module-specific color identification

plate

CC02

Product function

● I&M data

Yes; I&M0 to I&M3

Operating mode

● DQ

Yes

● DQ with energy-saving function

● PWM

● Oversampling

● MSO

Yes

Redundancy

● Redundancy capability

Yes

Supply voltage

6AG2132-6BF00-4CA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG2132-6BF00-4CA0 SIPLUS ET 200SP DQ 8X24VDC/ 0.5A TX RAIL -40 ... +70°C TX with 85°C for 10 minutes with conformal coating based on 6ES71326BF00-0CA0 . Fits BU type A0, Color code CC02, Channel Diagnose General information Product type designation DQ 8x24 VDC/0.
PAGE 2
Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Output voltage Rated value (DC) 24 V Power loss Power loss, typ. 1W Address area Address space per module ● Address space per module, max. 8 byte; 2 channels per submodule + QI information Digital outputs Type of digital output Source output (PNP, current-sourcing) Number of digital outputs 8; > +60 °C max. total current 1.
PAGE 3
● Current per channel, max. 0.5 A ● Current per module, max. 4A Total current of the outputs (per module) horizontal installation — up to 60 °C, max. 4A — up to 70 °C, max. 1A vertical installation — up to 50 °C, max. 4 A; in all other mounting positions Cable length ● shielded, max. 1 000 m ● unshielded, max. 600 m Isochronous mode Isochronous operation (application synchronized up to terminal) Yes Execution and activation time (TCO), min. 48 µs Bus cycle time (TDP), min.
PAGE 4
● EN 50121-3-2 Yes; EMC for rail vehicles ● EN 50121-4 Yes; EMC for signal and telecommunications systems ● EN 50124-1 Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.
PAGE 5
— Against mechanical environmental conditions acc. to EN 60721-3-5 Yes; Class 5M2 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.