Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG2134-6PA20-4BD0 PLC add-on module

Data sheet 6AG2134-6PA20-4BD0

SIPLUS ET 200SP AI EMETER 480VA TX RAIL -40 ... +70°C(TX mit

85°C für 10 Min) mit conformal coating based on 6ES7134-6PA20-

0BD0 . ANALOG INPUT MODULE, AI ENERGY METER 480VAC

ST, FITS TO BU-TYPE D0, CHANNEL DIAGNOSIS

General information

Product type designation AI Energy Meter 480VAC ST

usable BaseUnits BU type D0

Product function

● Voltage measurement

Yes

— with voltage transformer

Yes

● Current measurement

Yes

— without current transformer

— with current transformer

Yes

● Energy measurement

Yes

● Frequency measurement

Yes

● Power measurement

Yes

● Active power measurement

Yes

● Reactive power measurement

Yes

● I&M data

Yes; I&M0 to I&M3

● Isochronous mode

Operating mode

● cyclic measurement

Yes

6AG2134-6PA20-4BD0 Subject to change without notice

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 6AG2134-6PA20-4BD0 SIPLUS ET 200SP AI EMETER 480VA TX RAIL -40 ... +70°C(TX mit 85°C für 10 Min) mit conformal coating based on 6ES7134-6PA200BD0 .
PAGE 2
● acyclic measurement Yes ● Acyclic measured value access Yes ● Fixed measured value sets Yes ● Freely definable measured value sets Yes CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN Yes Installation type/mounting Mounting position Any Supply voltage Design of the power supply Supply via voltage measurement channel L1 Type of supply voltage AC 100 - 277 V permissible range, lower limit (AC) 90 V; At < -25 °C min.
PAGE 3
● Channel status display Yes; Green LED ● for channel diagnostics Yes; red Fn LED ● for module diagnostics Yes; green/red DIAG LED Integrated Functions Measuring functions ● Measuring procedure for voltage measurement TRMS ● Measuring procedure for current measurement TRMS ● Type of measured value acquisition seamless ● Curve shape of voltage Sinusoidal or distorted ● Buffering of measured variables Yes ● Parameter length 74 byte ● Bandwidth of measured value acquisition 2 kHz; Harmonics:
PAGE 4
— Rated value short-time withstand current restricted to 1 s 100 A — Input resistance measuring range 0 to 5 A 25 mΩ; At the terminal — Zero point suppression Parameterizable: 2 ... 250 mA, default 50 mA — Surge strength 10 A; for 1 minute Accuracy class according to IEC 61557-12 — Measured variable voltage 0,2 — Measured variable current 0,2 — Measured variable apparent power 0.5 — Measured variable active power 0.5 — Measured variable reactive power 1 — Measured variable power factor 0.
PAGE 5
● horizontal installation, max. 70 °C; = Tmax; +85 °C for 10 min (Tx acc. to EN 50155) Altitude during operation relating to sea level ● Installation altitude above sea level, max. 2 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl.
PAGE 6
● Electronic equipment on rolling stock acc. to EN 50155 Yes; Class PC2 protective coating acc.