Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG2135-6HD00-4BA1 PLC add-on module

Data sheet 6AG2135-6HD00-4BA1

SIPLUS ET 200SP AQ 4XU/I ST TX RAIL -40 ... +70°C TX with 85

°C for 10 minutes with conformal coating based on 6ES7135-6HD00-

0BA1 . AQ 4XU/I Standard, suitable for BU type A0, A1, Color code

CC00, Module diagnostics

General information

Product type designation AQ 4xU/I ST

Firmware version

● FW update possible

Yes

usable BaseUnits BU type A0, A1

Color code for module-specific color identification

plate

CC00

Product function

● I&M data

Yes; I&M0 to I&M3

● Output range scalable

Operating mode

● Oversampling

● MSO

CiR – Configuration in RUN

Reparameterization possible in RUN Yes

Calibration possible in RUN No

6AG2135-6HD00-4BA1 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG2135-6HD00-4BA1 SIPLUS ET 200SP AQ 4XU/I ST TX RAIL -40 ... +70°C TX with 85 °C for 10 minutes with conformal coating based on 6ES7135-6HD000BA1 .
PAGE 2
Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Input current Current consumption, max. 150 mA Power loss Power loss, typ. 1.5 W Address area Address space per module ● Address space per module, max. 8 byte; + 1 byte for QI information Analog outputs Number of analog outputs 4; > +60 °C max. 2x ±10 V permissible Voltage output, short-circuit current, max.
PAGE 3
Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 16 bit Settling time ● for resistive load 0.1 ms ● for capacitive load 1 ms ● for inductive load 0.5 ms Errors/accuracies Linearity error (relative to output range), (+/-) 0.03 % Temperature error (relative to output range), (+/-) 0.005 %/K Crosstalk between the outputs, min. -50 dB Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) 0.
PAGE 4
● between the channels and backplane bus Yes ● between the channels and the power supply of the electronics Yes Isolation Isolation tested with 707 V DC (type test) and according to EN 50155 (routine test) Standards, approvals, certificates Railway application ● EN 50121-3-2 Yes; EMC for rail vehicles ● EN 50121-4 Yes; EMC for signal and telecommunications systems ● EN 50124-1 Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.
PAGE 5
— Against mechanical environmental conditions acc. to EN 60721-3-3 Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) Use on land craft, rail vehicles and special-purpose vehicles — to biologically active substances according to EN 60721-3-5 Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request — to chemically active substances according to EN 60721-3-5 Yes; Class 5C3 (RH < 75 %) incl. salt spray acc.