Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG2138-6AA00-1BA0 PLC add-on module

Data sheet 6AG2138-6AA00-1BA0

SIPLUS ET 200SP TM COUNT 1X24 V T1 RAIL -25 ... +55°C T1

with 70°C for 10 min with conformal coating based on 6ES7138-

6AA00-0BA0 . Counting Module, 1 channel for 24V Incremental

encoder or 24V pulses, 3DI, 2DQ

General information

Product type designation TM Count 1x24V

usable BaseUnits BU type A0

Product function

● I&M data

Yes; I&M0 to I&M3

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

19.2V

● permissible range, upper limit (DC)

28.8V

● Reverse polarity protection

Yes

Input current

Current consumption, max. 60mA; without load

Encoder supply

Number of outputs 1

24 V encoder supply

6AG2138-6AA00-1BA0 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 6AG2138-6AA00-1BA0 SIPLUS ET 200SP TM COUNT 1X24 V T1 RAIL -25 ... +55°C T1 with 70°C for 10 min with conformal coating based on 6ES71386AA00-0BA0 . Counting Module, 1 channel for 24V Incremental encoder or 24V pulses, 3DI, 2DQ General information Product type designation TM Count 1x24V usable BaseUnits BU type A0 Product function ● I&M data Yes; I&M0 to I&M3 Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● permissible range, lower limit (DC) 19.
PAGE 2
● 24 V Yes; L+ (-0.8 V) ● Short-circuit protection Yes ● Output current, max. 300 mA Power loss Power loss, typ.
PAGE 3
Short-circuit protection ● Response threshold, typ. Yes; electronic/thermal 1A Limitation of inductive shutdown voltage to L+ (-33 V) Controlling a digital input Yes Digital output functions, parameterizable ● Switching tripped by comparison values Yes ● Freely usable digital output Yes Switching capacity of the outputs ● with resistive load, max. 0.5 A; Per digital output ● on lamp load, max.
PAGE 4
● Cable length, shielded, max. 600 m; depending on input frequency, encoder and cable quality; max. 50 m at 200 kHz ● Signal filter, parameterizable Yes ● Incremental encoder with A/B tracks, 90° phase offset Yes ● Incremental encoder with A/B tracks, 90° phase offset and zero track Yes ● Pulse encoder Yes ● Pulse encoder with direction Yes ● Pulse encoder with one impulse signal per count direction Yes Encoder signal 24 V — permissible voltage at input, min.
PAGE 5
● Continuous counting Yes ● Counter response parameterizable Yes ● Hardware gate via digital input Yes ● Software gate Yes ● Event-controlled stop Yes ● Synchronization via digital input Yes ● Counting range, parameterizable Yes Comparator — Number of comparators 2 — Direction dependency Yes — Can be changed from user program Yes Position detection ● Incremental acquisition Yes ● Suitable for S7-1500 Motion Control Yes Measuring functions ● Measuring time, parameterizable Yes ● Dyn
PAGE 6
● EN 50125-3 Yes; Signal and telecommunications systems - see ambient conditions; vibrations and shocks: Application point outside of tracks (1 m to 3 m away from track) ● EN 50155 Yes; Rail vehicles - temperature class Tx, horizontal mounting position, salt spray Class ST2 ● EN 61373 Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B ● Fire protection acc.
PAGE 7
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.