Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG2138-6DB00-1BB1 PLC add-on module

Data sheet 6AG2138-6DB00-1BB1

SIPLUS ET 200SP TM PULSE 2x24V -25°C...60°C T1 with 70°C for

10 min with conformal coating based on 6ES7138-6DB00-0BB1.

PWM and pulse output 2 channels 2 A for proportional valves and

DC motors

General information

Product type designation TM Pulse 2x24 V

Firmware version

● FW update possible

Yes

usable BaseUnits BU type B1

Color code for module-specific color identification

plate

CC40

Product function

● I&M data

Yes; I&M 0

● Isochronous mode

Yes

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

19.2V

● permissible range, upper limit (DC)

28.8V

● Short-circuit protection

Yes

● Reverse polarity protection

Yes; against destruction

Input current

6AG2138-6DB00-1BB1 Subject to change without notice

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 6AG2138-6DB00-1BB1 SIPLUS ET 200SP TM PULSE 2x24V -25°C...60°C T1 with 70°C for 10 min with conformal coating based on 6ES7138-6DB00-0BB1.
PAGE 2
Current consumption, max. 70 mA; without load Encoder supply Number of outputs 2; A common 24V encoder supply for both channels 24 V encoder supply ● 24 V Yes; L+ (-0.8 V) ● Short-circuit protection Yes; per module, electronic ● Output current, max. 300 mA Power loss Power loss, typ. 1.
PAGE 3
Short-circuit protection ● Response threshold, typ. Yes; electronic/thermal 6.8 A with Standard output, 2 A with High Speed output Limitation of inductive shutdown voltage to -0.8 V Controlling a digital input Yes Accuracy of pulse duration ±100 ppm ±0.5 µs with High Speed output, ±100 ppm ±9 µs with Standard output minimum pulse duration 1.
PAGE 4
● "1" to "0", typ. 0 µs; With High Speed output, 4.5 µs with Standard output ● "1" to "0", max. 0.8 µs; With High Speed output, 9 µs with Standard output Parallel switching of two outputs ● for uprating Yes Switching frequency ● with resistive load, max. 100 kHz; With High Speed output, 10 kHz with standard output ● with inductive load, max. 100 kHz; With High Speed output, 10 kHz with standard output ● on lamp load, max. 10 Hz Total current of the outputs ● Current per channel, max.
PAGE 5
● EN 50124-1 Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.
PAGE 6
Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc.