Data Sheet

Data sheet 6AG2193-6BP20-4BA0

SIPLUS ET 200SP BU15-P16+A10+2B TX RAIL -40 ... +70°C TX

with 85°C for 10 minutes with conformal coating based on 6ES7193-

6BP20-0BA0 . BU type A0, Push-in terminals, with 10 AUX terminals,

bridged to the left, WxH: 15x141 mm

General information

Product type designation BU type A0

Supply voltage

Rated value (DC) 24V

external protection for power supply lines Yes; 24 V DC/10 A miniature circuit breaker with type B or C

tripping characteristic

Current carrying capacity

up to 60 °C, max. 10A

Potential separation

between backplane bus and supply voltage Yes

Isolation

Isolation tested with 707 V DC (type test) and according to EN 50155 (routine test)

Standards, approvals, certificates

Railway application

● EN 50121-3-2

Yes; EMC for rail vehicles

6AG2193-6BP20-4BA0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG2193-6BP20-4BA0 SIPLUS ET 200SP BU15-P16+A10+2B TX RAIL -40 ... +70°C TX with 85°C for 10 minutes with conformal coating based on 6ES71936BP20-0BA0 .
PAGE 2
● EN 50121-4 Yes; EMC for signal and telecommunications systems ● EN 50124-1 Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.
PAGE 3
— Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 * The supplied plug covers must remain in place over the unused interfaces during operation! Conformal coating ● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high availability ● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection ● Electronic equipment on rolling stock acc. to EN 50155 Yes; Class PC2 protective coating acc.