Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG2223-1PL32-1XB0 PLC add-on module

Data sheet 6AG2223-1PL32-1XB0

SIPLUS S7-1200 SM 1223 16DI/16DQ RLY T1 RAIL -25 ... +55°C T1

with 70°C for 10 min with conformal coating based on 6ES7223-

1PL32-0XB0. Digital input/output 16DI/16DQ, 16 DI 24 V DC,

Sink/Source, 16DQ, relay 2 A

General information

Product type designation SM 1223, DI 16x24 V DC, DQ 16x relay

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Input current

from backplane bus 5 V DC, max. 180mA

Digital inputs

● from load voltage L+ (without load), max.

4 mA/input 11 mA/relay

Output voltage

Power supply to the transmitters

● present

Yes

Power loss

Power loss, typ. 10W

6AG2223-1PL32-1XB0 Subject to change without notice

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 6AG2223-1PL32-1XB0 SIPLUS S7-1200 SM 1223 16DI/16DQ RLY T1 RAIL -25 ... +55°C T1 with 70°C for 10 min with conformal coating based on 6ES72231PL32-0XB0. Digital input/output 16DI/16DQ, 16 DI 24 V DC, Sink/Source, 16DQ, relay 2 A General information Product type designation SM 1223, DI 16x24 V DC, DQ 16x relay Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Input current from backplane bus 5 V DC, max.
PAGE 2
Digital inputs Number of digital inputs ● in groups of Input characteristic curve in accordance with IEC 61131, type 1 16 2 Yes Number of simultaneously controllable inputs all mounting positions — up to 40 °C, max. 16 horizontal installation — up to 40 °C, max. 16 — up to 50 °C, max. 16 vertical installation — up to 40 °C, max. 16 Input voltage ● Type of input voltage DC ● Rated value (DC) 24 V ● for signal "0" 5 V DC at 1 mA ● for signal "1" 15 V DC at 2.
PAGE 3
Output current ● for signal "1" permissible range, max. 2A Output delay with resistive load ● "0" to "1", max. 10 ms ● "1" to "0", max. 10 ms Total current of the outputs (per group) horizontal installation — up to 50 °C, max. 8 A; Current per mass Relay outputs ● Number of relay outputs 16 ● Rated supply voltage of relay coil L+ (DC) 24 V ● Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000 Switching capacity of contacts — with inductive load, max.
PAGE 4
Isolation tested with According to EN 50155 (routine test) Degree and class of protection IP degree of protection IP20 Standards, approvals, certificates Railway application ● EN 50121-3-2 Yes; EMC for rail vehicles ● EN 50121-4 Yes; EMC for signal and telecommunications systems ● EN 50124-1 Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.
PAGE 5
— to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl.
PAGE 6
Other Note: For use in railway applications, also observe the product information "SIPLUS extreme RAIL" A5E37661960A Online Support article 109736776 last modified: 09/15/2019 6AG2223-1PL32-1XB0 Page 6/6 09/16/2019 Subject to change without notice © Copyright Siemens