Data Sheet

● EN 50125-3
Yes; Signal and telecommunications systems - see ambient
conditions; vibrations and shocks: Application point outside of
tracks (1 m to 3 m away from track)
● EN 50155
Yes; Rail vehicles - temperature class T1, horizontal mounting
position, salt spray Class ST2
● EN 61373
Yes; Rail vehicles - vibrations and shocks: Category 1 Class A/B
● Fire protection acc. to EN 45545-2
Yes; Rail vehicles - verification on request
Ambient conditions
Free fall
● Fall height, max.
0.3m; five times, in product package
Ambient temperature during operation
● min.
-25°C; = Tmin (incl. condensation/frost); start-up @ -25 °C
● max.
60°C; = Tmax; +70 °C for 10 minutes (T1 acc. to EN 50155) for
horizontal mounting position
Ambient temperature during storage/transportation
● min.
-40°C
● max.
70°C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.
2000m
● Ambient air temperature-barometric pressure-
altitude
Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Relative humidity
● With condensation, tested in accordance with
IEC 60068-2-38, max.
100%; RH incl. condensation/frost (no commissioning under
condensation conditions)
Resistance
Coolants and lubricants
— Resistant to commercially available
coolants and lubricants
Yes; Incl. diesel and oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according
to EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry rot spores (with the
exception of fauna); Class 3B3 on request
— to chemically active substances according
to EN 60721-3-3
Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-
52 (severity degree 3); *
— to mechanically active substances
according to EN 60721-3-3
Yes; Class 3S4 incl. sand, dust, *
Use on land craft, rail vehicles and special-purpose vehicles
— to biologically active substances according
to EN 60721-3-5
Yes; Class 5B2 mold, fungus and dry rot spores (with the
exception of fauna); Class 5B3 on request
— to chemically active substances according
to EN 60721-3-5
Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 50155
(ST2); *
— to mechanically active substances
according to EN 60721-3-5
Yes; Class 5S3 incl. sand, dust; *
Usage in industrial process technology
6AG2241-1AH32-1XB0 Subject to change without notice
Page 3/
4
09/16/2019 © Copyright Siemens