Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG2512-1DK01-1AB0 PLC CPU

Data sheet 6AG2512-1DK01-1AB0

SIPLUS ET 200SP CPU 1512SP-1 PN -25 ... +60°C T1 with 70°C for

10 min with conformal coating based on 6ES7512-1DK01-0AB0.

Central processing unit with Work memory 200 KB for program and 1

MB for data, 1st interface: PROFINET IRT with 3-port switch, 48 ns

bit performance, SIMATIC Memory Card required, Bus Adapter

required for Port 1 and 2

General information

Product type designation CPU 1512SP-1 PN

Configuration control

via dataset Yes

Control elements

Mode selector switch 1

Supply voltage

Type of supply voltage 24 V DC

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

Current consumption (rated value) 0.6A

Inrush current, max. 4.7A; Rated value

I²t 0.14A²·s

6AG2512-1DK01-1AB0 Subject to change without notice

Page 1/

Summary of content (12 pages)

PAGE 1
Data sheet 6AG2512-1DK01-1AB0 SIPLUS ET 200SP CPU 1512SP-1 PN -25 ... +60°C T1 with 70°C for 10 min with conformal coating based on 6ES7512-1DK01-0AB0.
PAGE 2
Power Infeed power to the backplane bus 8.75 W Power loss Power loss, typ. 5.6 W Memory Number of slots for SIMATIC memory card 1 SIMATIC memory card required Yes Work memory ● integrated (for program) 200 kbyte ● integrated (for data) 1 Mbyte Load memory ● Plug-in (SIMATIC Memory Card), max. 32 Gbyte Backup ● maintenance-free Yes CPU processing times for bit operations, typ. 48 ns for word operations, typ. 58 ns for fixed point arithmetic, typ.
PAGE 3
● Number of isochronous mode OBs 1 ● Number of technology synchronous alarm OBs 2 ● Number of startup OBs 100 ● Number of asynchronous error OBs 4 ● Number of synchronous error OBs 2 ● Number of diagnostic alarm OBs 1 Nesting depth ● per priority class 24 Counters, timers and their retentivity S7 counter ● Number 2 048 Retentivity — adjustable Yes IEC counter ● Number Any (only limited by the main memory) Retentivity — adjustable Yes S7 times ● Number 2 048 Retentivity — adjustable
PAGE 4
per integrated IO subsystem — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte per CM/CP — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte Subprocess images ● Number of subprocess images, max. 32 Address space per module ● Address space per module, max. 288 byte; For input and output data respectively Address space per station ● Address space per station, max.
PAGE 5
● in AS, master Yes ● in AS, slave Yes ● on Ethernet via NTP Yes Interfaces Number of PROFINET interfaces 1 Number of PROFIBUS interfaces 1; Via CM DP module With optical interface Yes; via BusAdapter 1. Interface Interface types ● Number of ports 3; 1. integr. + 2. via BusAdapter ● integrated switch Yes ● RJ 45 (Ethernet) Yes; X1 P3; opt.
PAGE 6
— Number of IO Devices per tool, max.
PAGE 7
RJ 45 (Ethernet) ● 100 Mbps Yes ● Autonegotiation Yes ● Autocrossing Yes ● Industrial Ethernet status LED Yes RS 485 ● Transmission rate, max. 12 Mbit/s Protocols Number of connections ● Number of connections, max.
PAGE 8
— Data record routing Yes — Isochronous mode No — Equidistance No — Number of DP slaves 125; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET — Activation/deactivation of DP slaves Yes OPC UA ● OPC UA server Yes; Data access (read, write, subscribe), runtime license required — Application authentication Yes — Security policies Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — User authentication "anonymous" or by use
PAGE 9
Forcing ● Forcing Yes ● Forcing, variables Peripheral inputs/outputs ● Number of variables, max. 200 Diagnostic buffer ● present Yes ● Number of entries, max.
PAGE 10
Isolation Isolation tested with 707 V DC (type test) and according to EN 50155 (routine test) Standards, approvals, certificates Railway application ● EN 50121-3-2 Yes; EMC for rail vehicles ● EN 50121-4 Yes; EMC for signal and telecommunications systems ● EN 50124-1 Yes; Railway applications - overvoltage category OV2; pollution degree PD2; rated surge voltage UNi = 0.
PAGE 11
— to biologically active substances according to EN 60721-3-5 Yes; Class 5B2 mold, fungus and dry rot spores (with the exception of fauna); Class 5B3 on request — to chemically active substances according to EN 60721-3-5 Yes; Class 5C3 (RH < 75 %) incl. salt spray acc. to EN 50155 (ST2); * — to mechanically active substances according to EN 60721-3-5 Yes; Class 5S3 incl. sand, dust; * — Against mechanical environmental conditions acc.
PAGE 12
● Protection level: Complete protection Yes Cycle time monitoring ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Dimensions Width 100 mm Height 117 mm Depth 75 mm Weights Weight, approx.