Data Sheet

ManualsBrandsSIEMENS ManualsElectrical Enclosure PeripheralsBusbar 6BK1943-2AA00-0AA0

Data sheet 6BK1943-2AA00-0AA0

SIPLUS HCS4300 POM4320 Busbar mounting (IEC). Power output

module for mounting on busbars system. With 9 outputs each max.

7680 W (for operating mode Half-wave control: Depending on the

Inrush current of the load limitation to max. 4000 W)

General information

Product type designation POM4320

Installation type/mounting

Mounting type Busbar mounting

Mounting position vertical

Type of ventilation Self-ventilation

Supply voltage

Type of supply voltage AC

Rated value (AC) 400V

Relative negative tolerance 10%

Relative positive tolerance 30%

2nd rated value (AC) 480V

Relative negative tolerance 25%

Relative positive tolerance 8%

Line frequency

● Rated value 50 Hz

Yes

● Rated value 60 Hz

Yes

6BK1943-2AA00-0AA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6BK1943-2AA00-0AA0 SIPLUS HCS4300 POM4320 Busbar mounting (IEC). Power output module for mounting on busbars system. With 9 outputs each max. 7680 W (for operating mode Half-wave control: Depending on the Inrush current of the load limitation to max.
PAGE 2
● Relative symmetrical tolerance 5% Mains buffering ● Recovery time after power failure, typ. 1s Connection method ● Design of electrical connection for supply voltage Busbar mounting, 3-pole + PE Input voltage Design of the power supply Power supply via CIM Power Active power input, max. 8W Power electronics Type of load Ohmic load Type of control of the heating elements ● Phase control Power capacity, max. ● For phase against phase with fan at 40 °C, max.
PAGE 3
● Design of electrical connection at output for heating and fan Connector, 3-pole with spring-loaded connection — Connectable conductor cross-sections, solid 1x (0.2 ... 10 mm²) — Connectable conductor cross-sections, finely stranded with wire end processing 1x (0.25 ... 6 mm²) — Connectable conductor cross-sections for AWG cables, stranded 1x (24 ...
PAGE 4
Overvoltage category III Degree of pollution 2 EMC EMC interference emission Limit value in accordance with IEC 61000-6-4:2007 + A1:2011 Electrostatic discharge acc. to IEC 61000-4-2 4 kV contact discharge / 8 kV air discharge Field-related interference acc. to IEC 61000-4-3 10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz) Conducted interference due to burst acc. to IEC 61000-4-4 2 kV power supply lines, 2 kV load lines Conducted interference due to surge acc.
PAGE 5
Vibrations ● Vibration resistance during operation acc. to IEC 60068-2-6 10 ... 58 Hz / 0.075 mm, 58 ... 150 Hz / 1 g ● Vibration resistance during storage acc. to IEC 60068-2-6 5 ... 8.5 Hz / 3.5 mm, 8.5 ... 500 Hz / 1 g Shock testing ● Shock resistance during operation acc. to IEC 60068-2-27 15 g / 11 ms / 3 shocks/axis ● Shock resistance during storage acc.