User Manual

Programming LOGO!
3.8 Configuring additional functions for LOGO! (0BA7 only)
LOGO!
118 Manual, 04/2011, A5E03556174-01
3.8 Configuring additional functions for LOGO! (0BA7 only)
If you are a LOGO! 0BA7 user, then after you have successfully created the second circuit
program, you can configure additional functions, including the new functions for the 0BA7
device series, as described below.
New menu commands
● Network
● Diagnostics
Note
These two menu commands are also available in the main menu of the ES7 version of
the LOGO! TD.
UDF and Data Log
You can configure the UDF and Data Log functions only from LOGO!Soft Comfort. After you
have configured them in LOGO!Soft Comfort and downloaded them to the LOGO! 0BA7
device, you can then edit elements connected to these functions from the device:
● UDFs (User-Defined Functions)
● Data Log
Network digital and analog I/O
You can configure the following connectors representing network digital or analog
inputs/outputs only from LOGO!Soft Comfort:
● Network digital inputs
● Network analog inputs
● Network digital outputs
● Network analog outputs
Note
If your circuit program in a LOGO! 0BA7 device contains any network digital or analog
inputs/outputs, you can only edit the "Par" parameter of function blocks. You can not edit
any of the rest of the circuit program from the device.