User Manual

Technical data
A.3 Technical data: LOGO! DM8 230R and LOGO! DM16 230R
LOGO!
Manual, 04/2011, A5E03556174-01
325
LOGO! DM8 230R LOGO! DM16 230R
Delay time at 0 to 1:
• 120V AC
• 240 V AC
• 120 V DC
• 240V DC
Delay time at 1 to 0:
• 120V AC
• 240 V AC
• 120 V DC
• 240V DC
• typ. 50 ms
• typ. 30 ms
• typ. 25 ms
• typ. 15 ms
• typ. 65 ms
• typ. 105 ms
• typ. 95 ms
• typ. 125 ms
• typ. 50 ms
• typ. 30 ms
• typ. 25 ms
• typ. 15 ms
• typ. 65 ms
• typ. 105 ms
• typ. 95 ms
• typ. 125 ms
Line length (unshielded) max. 100 m max. 100 m
Digital outputs
Number 4 8
Output type Relay outputs Relay outputs
Electrical isolation Yes Yes
In groups of 1 1
Control of a digital input Yes Yes
Continuous current I
th
max. 5 A per relay max. 5 A per relay
Surge current max. 30 A max. 30 A
Incandescent lamp load (25000
switching cycles) at:
230/240 V AC
115/120 V AC
1000 W
500 W
1000 W
500 W
Fluorescent tubes with ballast
(25000 switching cycles)
10 x 58 W (at 230/240 V AC) 10 x 58 W (at 230/240 V AC)
Fluorescent tubes,
conventionally compensated
(25000 switching cycles)
1 x 58 W (at 230/240 V AC) 1 x 58 W (at 230/240 V AC)
Fluorescent tubes,
uncompensated (25000
switching cycles)
10 x 58 W (at 230/240 V AC) 10 x 58 W (at 230/240 V AC)
Short circuit-proof cos 1 Power protection B16, 600A Power protection B16, 600A
Short circuit-proof cos 0.5 to 0.7 Power protection B16, 900A Power protection B16, 900A
Derating none; across the entire
temperature range
none; across the entire
temperature range
Parallel output circuits for power
increase
Not permitted Not permitted
Protection of output relay (if
desired)
max. 16 A,
characteristic B16
max. 16 A,
characteristic B16
Switching rate
Mechanical 10 Hz 10 Hz
Ohmic load/lamp load 2 Hz 2 Hz
Inductive load 0.5 Hz 0.5 Hz