Datasheet

Product data sheet 6EP1332-1LD00

PSU100D 24 V/3.1 A STABILIZED POWER SUPPLY

INPUT: 100-240 V AC OUTPUT: 24 V DC/3.1 A

Technical specifications

Product SITOP PSU100D

Power supply, type 24 V/3.1 A

Input

Input 1-phase AC

Rated voltage value Vin rated 100 … 240 V

Voltage range 85 … 264 V

Wide-range input Yes

Mains buffering at Iout rated, min. 15 ms

Mains buffering at Vin = 115/230 V

Rated line frequency 50 / 60 Hz

Rated line range 47 ... 63 Hz

Input current / at nominal level of the input voltage 100 V / nominal

value

1.5 A

Input current / at nominal level of the input voltage 240 V / nominal

value

1 A

Switch-on current limiting (+25 °C), max. 60 A

I²t, max. 1.2 A²·s

Built-in incoming fuse internal

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A, characteristic C,

or from 16 A, characteristic B

Output

6EP1332-1LD00

Page 1/ 10/01/2012

subject to modifications

PAGE 1
Product data sheet 6EP1332-1LD00 PSU100D 24 V/3.1 A STABILIZED POWER SUPPLY INPUT: 100-240 V AC OUTPUT: 24 V DC/3.1 A Technical specifications Product SITOP PSU100D Power supply, type 24 V/3.1 A Input Input 1-phase AC Rated voltage value Vin rated 100 … 240 V Voltage range 85 … 264 V Wide-range input Yes Mains buffering at Iout rated, min. 15 ms Mains buffering at Vin = 115/230 V Rated line frequency 50 / 60 Hz Rated line range 47 ...
PAGE 2
Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 2% Static mains compensation, approx. 0.5 % Static load balancing, approx. 1% Residual ripple peak-peak, max. 100 mV Spikes peak-peak, max. (bandwidth: 20 MHz) 100 mV Adjustment range 22 … 28 V Product feature / output voltage adjustable Yes Output voltage setting via potentiometer Status display Green LED for 24 V OK On/off behavior Overshoot of Vout < 2 % Startup delay, max. 2.
PAGE 3
stray current / typical 1 mA CE mark Yes UL/cUL (CSA) approval cULus-Listed (UL 508, CSA C22.2 No. 107.1) in process, cURus (UL 60950-1, CSA C22.2 No.