Datasheet

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24 V

Total tolerance, static ± 2 %

Static mains compensation, approx. 0.5 %

Static load balancing, approx. 1 %

Residual ripple peak-peak, max. 100 mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 100 mV

Adjustment range 22 … 28 V

Product feature / output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED for 24 V OK

On/off behavior Overshoot of Vout < 2 %

Startup delay, max. 1 s

Voltage increase time / of the output voltage / maximum 30 ms

Rated current value Iout rated 4.1 A

Current range 0 … 4.1 A

• Note 4.1 A up to +50 °C, 2 A up to +70 °C

delivered active power / typ. 100 W

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced performance 2

Efficiency

Efficiency at Vout rated, Iout rated, approx. 86 %

Power loss at Vout rated, Iout rated, approx. 16 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max. 0.5 %

Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ. 5 %

Protection and monitoring

Output overvoltage protection < 35 V

Current limitation, typ. 4.9 A

Characteristic feature of the output / short-circuit protected Yes

Short-circuit protection Electronic shutdown, automatic restart

Enduring short circuit current / Effective level / typical 10 A

Overload/short-circuit indicator -

Safety

Primary/secondary isolation Yes

Potential separation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN

50178

Protection class Class I

stray current / maximum 3.5 mA

6EP1332-1LD10

Page 2/ 10/01/2012

subject to modifications