Datasheet

I²t, max. 3.3 A²·s

Built-in incoming fuse T 6.3 A/250 V (not accessible)

Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic C

Output

Output Controlled, isolated DC voltage

Rated voltage Vout DC 24 V

Total tolerance, static ± 3 %

Static mains compensation, approx. 0.1 %

Static load balancing, approx. 0.5 %

Residual ripple peak-peak, max. 150 mV

Residual ripple peak-peak, typ. 50 mV

Spikes peak-peak, max. (bandwidth: 20 MHz) 240 mV

Spikes peak-peak, typ. (bandwidth: 20 MHz) 150 mV

Adjustment range 22.8 … 26.4 V

Product feature / output voltage adjustable Yes

Output voltage setting via potentiometer

Status display Green LED for 24 V OK

On/off behavior Overshoot of Vout approx. 4 %

Startup delay, max. 1.5 s

Voltage rise, typ. 170 ms

Rated current value Iout rated 10 A

Current range 0 … 10 A

• Note +45 ... +60 °C: Derating 2%/K

delivered active power / typ. 240 W

Parallel switching for enhanced performance Yes

Numbers of parallel switchable units for enhanced performance 2

Efficiency

Efficiency at Vout rated, Iout rated, approx. 89 %

Power loss at Vout rated, Iout rated, approx. 34 W

Closed-loop control

Dynamic mains compensation (Vin rated ±15 %), max. 0.3 %

Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. 2 %

Load step setting time 10 to 90%, typ. 0.5 ms

Load step setting time 90 to 10%, typ. 0.7 ms

Protection and monitoring

Output overvoltage protection < 33 V

Current limitation, typ. 10.5 A

Characteristic feature of the output / short-circuit protected Yes

Short-circuit protection Constant current characteristic

6EP1334-1LB00

Page 2/ 05/19/2014

subject to modifications