Data Sheet

ManualsBrandsSIEMENS ManualsRack & DIN Rail Mount PSUs6EP1336-1LB00 Rail mounted PSU (DIN)

Data sheet 6EP1336-1LB00

SITOP PSU100L 24 V/20 A

SITOP PSU100L 24 V/20 A Stabilized power supply input: 100-240 V

AC output: 24 V DC/20 A

Input

Input 1-phase AC or DC

Rated voltage value Vin rated 100...240V

Supply voltage

● at DC

100...240V

Input voltage

● 1 at AC

85...264V

● at DC

88...370V

Wide-range input Yes

Mains buffering at Vin = 93/187 V

Mains buffering at Iout rated, min. 20ms; at Vin = 93/187 V

Rated line frequency 1 50Hz

Rated line frequency 2 60Hz

Rated line range 47...63Hz

Input current

● at rated input voltage 120 V

5.55A

● at rated input voltage 230 V

2.35A

Switch-on current limiting (+25 °C), max. 45A

Duration of inrush current limiting at 25 °C

6EP1336-1LB00 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6EP1336-1LB00 SITOP PSU100L 24 V/20 A SITOP PSU100L 24 V/20 A Stabilized power supply input: 100-240 V AC output: 24 V DC/20 A Input Input 1-phase AC or DC Rated voltage value Vin rated 100 ... 240 V Supply voltage ● at DC 100 ... 240 V Input voltage ● 1 at AC 85 ... 264 V ● at DC 88 ... 370 V Wide-range input Yes Mains buffering at Vin = 93/187 V Mains buffering at Iout rated, min.
PAGE 2
● typical 15 ms I²t, max. 3.3 A²·s Built-in incoming fuse T 10 A/250 V (not accessible) Protection in the mains power input (IEC 898) Recommended miniature circuit breaker: from 10 A characteristic C Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.1 % Static load balancing, approx. 1% Residual ripple peak-peak, max. 150 mV Residual ripple peak-peak, typ. 50 mV Spikes peak-peak, max.
PAGE 3
Property of the output Short-circuit proof Yes Short-circuit protection Constant current characteristic Enduring short circuit current RMS value ● typical Overload/short-circuit indicator 24 A - Safety Primary/secondary isolation Yes Galvanic isolation Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 Protection class Class I Leakage current ● maximum 3.5 mA ● typical 0.
PAGE 4
Depth of the enclosure 125 mm Required spacing ● top 50 mm ● bottom 50 mm ● left 0 mm ● right 0 mm Weight, approx. 1.8 kg Product feature of the enclosure housing for side-byside mounting Yes Installation Snaps onto DIN rail EN 60715 35x7.