Datasheet

ManualsBrandsSIEMENS ManualsRack & DIN Rail Mount PSUsSITOP Modular DIN Rail Power Supply 24Vdc 40A 960W, 1-Phase

Product data sheet 6EP1337-3BA00

SITOP MODULAR 40 STABILIZED POWER SUPPLY

INPUT: 120/230 V AC OUTPUT: 24 V DC/40 A

Technical specifications

Product SITOP modular

Power supply, type 24 V/40 A

Input

Input 1-phase and 2-phase AC

Supply voltage / 1 / at AC / nominal value 120 V

Supply voltage / 2 / at AC / nominal value 230 V

Voltage range

• Note Set by means of wire jumper on the device; starting from Vin >

95/190 V

Input voltage / 1 / at AC 85 … 132 V

Input voltage / 2 / at AC 176 … 264 V

Wide-range input No

Overvoltage resistance 2.3 × Vin rated, 1.3 ms

Mains buffering at Iout rated, min. 20 ms

Mains buffering at Vin = 230 V

Rated line frequency 50 / 60 Hz

Rated line range 47 ... 63 Hz

Input current / at nominal level of the input voltage 120 V 15 A

Input current / at nominal level of the input voltage 230 V 8 A

Switch-on current limiting (+25 °C), max. 125 A

6EP1337-3BA00

Page 1/ 10/01/2012

subject to modifications

Summary of content (4 pages)

PAGE 1
Product data sheet 6EP1337-3BA00 SITOP MODULAR 40 STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V DC/40 A Technical specifications Product SITOP modular Power supply, type 24 V/40 A Input Input 1-phase and 2-phase AC Supply voltage / 1 / at AC / nominal value 120 V Supply voltage / 2 / at AC / nominal value 230 V Voltage range • Note Set by means of wire jumper on the device; starting from Vin > 95/190 V Input voltage / 1 / at AC 85 … 132 V Input voltage / 2 / at AC 176 … 264 V Wi
PAGE 2
I²t, max. 26 A²·s Built-in incoming fuse Yes Protection in the mains power input (IEC 898) Recommended miniature circuit breaker at 1-phase operation: 20 A, characteristic C; required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2421-4BA10 (120 V) or 3RV24111JA10 (230 V) Output Output Controlled, isolated DC voltage Rated voltage Vout DC 24 V Total tolerance, static ± 3% Static mains compensation, approx. 0.1 % Static load balancing, approx. 0.
PAGE 3
Load step setting time 50 to 100%, typ. 2 ms Load step setting time 100 to 50%, typ. 2 ms Setting time / maximum 5 ms Protection and monitoring Output overvoltage protection < 35 V Current limitation, typ. 46 A Characteristic feature of the output / short-circuit protected Yes Short-circuit protection Alternatively, constant current characteristic approx.
PAGE 4
Connections / Output L+, M: 2 screw terminals each for 0.5 ... 10 mm² Connections / Auxiliary - Width / of the housing 240 mm Height / of the housing 125 mm Depth / of the housing 125 mm Installation width 240 mm Mounting height 225 mm Weight, approx. 2.